skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Parametric study of injection rates with solenoid injectors in an injection quantity and rate measuring device

Abstract

A Moehwald HDA (HDA is a German acronym: Hydraulischer Druckanstieg: hydraulic pressure increase) injection quantity and rate measuring unit is used to investigate injection rates obtained with a fast-acting, preproduction diesel solenoid injector. Experimental parametric variations are performed to determine their impact on measured injection rate traces. A pilot–main injection strategy is investigated for various dwell times; these preproduction injectors can operate with very short dwell times with distinct pilot and main injection events. Dwell influences the main injection rate shape. Furthermore, a comparison between a diesel-like fuel and a gasoline-like fuel shows that injection rates are comparable for a single injection but dramatically different for multiple injections with short dwells.

Authors:
 [1];  [1]
  1. Sandia National Lab. (SNL-CA), Livermore, CA (United States)
Publication Date:
Research Org.:
Sandia National Lab. (SNL-CA), Livermore, CA (United States)
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office (EE-3V)
OSTI Identifier:
1262232
Report Number(s):
SAND-2016-6061J
Journal ID: ISSN 0742-4795; 642657
Grant/Contract Number:
AC04-94AL85000
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
Journal of Engineering for Gas Turbines and Power
Additional Journal Information:
Journal Volume: 137; Journal Issue: 10; Journal ID: ISSN 0742-4795
Publisher:
ASME
Country of Publication:
United States
Language:
English
Subject:
33 ADVANCED PROPULSION SYSTEMS

Citation Formats

Busch, Stephen, and Miles, Paul C. Parametric study of injection rates with solenoid injectors in an injection quantity and rate measuring device. United States: N. p., 2015. Web. doi:10.1115/1.4030095.
Busch, Stephen, & Miles, Paul C. Parametric study of injection rates with solenoid injectors in an injection quantity and rate measuring device. United States. doi:10.1115/1.4030095.
Busch, Stephen, and Miles, Paul C. Tue . "Parametric study of injection rates with solenoid injectors in an injection quantity and rate measuring device". United States. doi:10.1115/1.4030095. https://www.osti.gov/servlets/purl/1262232.
@article{osti_1262232,
title = {Parametric study of injection rates with solenoid injectors in an injection quantity and rate measuring device},
author = {Busch, Stephen and Miles, Paul C.},
abstractNote = {A Moehwald HDA (HDA is a German acronym: Hydraulischer Druckanstieg: hydraulic pressure increase) injection quantity and rate measuring unit is used to investigate injection rates obtained with a fast-acting, preproduction diesel solenoid injector. Experimental parametric variations are performed to determine their impact on measured injection rate traces. A pilot–main injection strategy is investigated for various dwell times; these preproduction injectors can operate with very short dwell times with distinct pilot and main injection events. Dwell influences the main injection rate shape. Furthermore, a comparison between a diesel-like fuel and a gasoline-like fuel shows that injection rates are comparable for a single injection but dramatically different for multiple injections with short dwells.},
doi = {10.1115/1.4030095},
journal = {Journal of Engineering for Gas Turbines and Power},
number = 10,
volume = 137,
place = {United States},
year = {Tue Mar 31 00:00:00 EDT 2015},
month = {Tue Mar 31 00:00:00 EDT 2015}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Save / Share: