skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: High-quality ultra-flat BiSbTe 3 films grown by MBE

; ; ; ORCiD logo; ;
Publication Date:
Sponsoring Org.:
USDOE Office of Science (SC), Basic Energy Sciences (BES) (SC-22)
OSTI Identifier:
Grant/Contract Number:
Resource Type:
Journal Article: Publisher's Accepted Manuscript
Journal Name:
Journal of Crystal Growth
Additional Journal Information:
Journal Volume: 410; Journal Issue: C; Related Information: CHORUS Timestamp: 2017-07-04 09:41:42; Journal ID: ISSN 0022-0248
Country of Publication:

Citation Formats

Liu, Wei, Endicott, Lynn, Stoica, Vladimir A., Chi, Hang, Clarke, Roy, and Uher, Ctirad. High-quality ultra-flat BiSbTe 3 films grown by MBE. Netherlands: N. p., 2015. Web. doi:10.1016/j.jcrysgro.2014.10.011.
Liu, Wei, Endicott, Lynn, Stoica, Vladimir A., Chi, Hang, Clarke, Roy, & Uher, Ctirad. High-quality ultra-flat BiSbTe 3 films grown by MBE. Netherlands. doi:10.1016/j.jcrysgro.2014.10.011.
Liu, Wei, Endicott, Lynn, Stoica, Vladimir A., Chi, Hang, Clarke, Roy, and Uher, Ctirad. 2015. "High-quality ultra-flat BiSbTe 3 films grown by MBE". Netherlands. doi:10.1016/j.jcrysgro.2014.10.011.
title = {High-quality ultra-flat BiSbTe 3 films grown by MBE},
author = {Liu, Wei and Endicott, Lynn and Stoica, Vladimir A. and Chi, Hang and Clarke, Roy and Uher, Ctirad},
abstractNote = {},
doi = {10.1016/j.jcrysgro.2014.10.011},
journal = {Journal of Crystal Growth},
number = C,
volume = 410,
place = {Netherlands},
year = 2015,
month = 1

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record at 10.1016/j.jcrysgro.2014.10.011

Citation Metrics:
Cited by: 3works
Citation information provided by
Web of Science

Save / Share:
  • We have investigated photoluminescence properties of ultra-high quality ZnO thin films grown by an rf-magnetron sputtering method. From the results of x-ray diffraction patterns, we have found that a high growth temperature of {approx}600 degree sign C and the introduction of a low-temperature buffer layer are essential in the growth of the high-quality thin films. In photoluminescence (PL) spectra, the free exciton band is observed and the defect-related PL is negligibly weak, reflecting high crystallinity of the film. Furthermore, under high-density excitation conditions, a PL band due to an exciton-exciton scattering process, the so-called P emission, is observed.
  • Cd/sub 1-//sub x/Mn/sub x/Te films (thickness approx.0.5, x = 0.10--0.37) have been grown by metalorganic chemical vapor deposition on commercial GaAs and glass substrates with and without buffer layers of CdTe and CdS. Raman scattering shows the films to be of high quality, despite the large film-substrate lattice mismatch. CdTe-like and MnTe-like phonon lines are sharp and strong in first and second order with widths less than or equal to10 cm/sup -1/, and clearly appear in combinations up to fourth order. Raman and photoluminescence analysis also establish an optimum growth temperature and limits on the fraction of Mn.
  • High-quality strain-relaxed SiGe templates with a low threading dislocation density and smooth surface are critical for device performance. In this work, SiGe films on low temperature Si buffer layers were grown by solid-source molecular beam epitaxy and characterized by atomic force microscope, double-axis x-ray diffraction, photoluminescence spectroscopy, and Raman spectroscopy. Effects of the growth temperature and the thickness of the low temperature Si buffer were studied. It was demonstrated that when using proper growth conditions for the low temperature Si buffer the Si buffer became tensily strained and gave rise to the compliant effect. The lattice mismatch between the SiGemore » and the Si buffer layer was reduced. A 500 nm Si{sub 0.7}Ge{sub 0.3} film with a low threading dislocation density as well as smooth surface was obtained by this method. {copyright} 2001 American Institute of Physics.« less
  • Strained epitaxial SrTiO{sub 3} films were grown on orthorhombic (101) DyScO{sub 3} substrates by reactive molecular-beam epitaxy. The epitaxy of this substrate/film combination is cube on cube with a pseudocubic out-of-plane (001) orientation. The strain state and structural perfection of films with thicknesses ranging from 50 to 1000 {angstrom} were examined using x-ray scattering. The critical thickness at which misfit dislocations was introduced was between 350 and 500 {angstrom}. These films have the narrowest rocking curves (full width at half maximum) ever reported for any heteroepitaxial oxide film (0.0018{sup o}). Only a modest amount of relaxation is seen in filmsmore » exceeding the critical thicknesses even after postdeposition annealing at 700{sup o}C in 1 atm of oxygen. The dependence of strain relaxation on crystallographic direction is attributed to the anisotropy of the substrate. These SrTiO{sub 3} films show structural quality more typical of semiconductors such as GaAs and silicon than perovskite materials; their structural relaxation behavior also shows similarity to that of compound semiconductor films.« less