Experimental observations on electrorefining spent nuclear fuel in molten LiCl-KCl/liquid cadmium system.
Argonne National Laboratory (ANL) is currently performing a demonstration program for the Department of Energy (DOE) which processes spent nuclear fuel from the Experimental Breeder Reactor (EBR-II). One of the key steps in this demonstration program is electrorefining of the spent fuel in a molten LiCl-KCl/liquid cadmium system using a pilot scale electrorefiner (Mk-IV ER). This article summarizes experimental observations and engineering aspects for electrorefining spent fuel in the molten LiCl-KCl/liquid cadmium system. It was found that the liquid cadmium pool acted as an intermediate electrode during the electrorefining process in the ER. The cadmium level was gradually decreased due to its high vapor pressure and vaporization rate at the ER operational temperature. The low cadmium level caused the anode assembly momentarily to touch the ER vessel hardware, which generated a periodic current change at the salt/cathode interface and improved uranium recovery efficiency for the process. The primary current distributions calculated by numerical simulations were used in interpreting the experimental results.
- Research Organization:
- Argonne National Lab., IL (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 12431
- Report Number(s):
- ANL/NT/CP-98226; TRN: US0102512
- Resource Relation:
- Conference: 3rd International Symposium on New Materials, Montreal, Quebec (CA), 07/04/1999--07/08/1999; Other Information: PBD: 14 Jul 1999
- Country of Publication:
- United States
- Language:
- English
Similar Records
EXPERIMENTAL OBSERVATIONS ON THE ROLES OF CADMIUM POOL IN MARK-IV ELECTROREFINER
Simplified Reference Electrode for Electrorefining of Spent Nuclear Fuel in High Temperature Molten Salt