skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Radio Channel Simulator (RCSM)

Abstract

This is a simulation package for making site specific predictions of radio signal strength. The software computes received power at discrete grid points as a function of the transmitter location and propagation environment. It is intended for use with wireless network simulation packages and to support wireless network deployments.

Publication Date:
Research Org.:
Oak Ridge National Laboratory
Sponsoring Org.:
USDOE
OSTI Identifier:
1231346
Report Number(s):
RCSIM; 002533IBMPC00
DOE Contract Number:
DE-AC05-00OR22725
Resource Type:
Software
Software Revision:
00
Software Package Number:
002533
Software Package Contents:
Media Directory; Software Abstract; Media includes Source Code; /1 CD ROM
Software CPU:
IBMPC
Open Source:
No
Source Code Available:
Yes
Country of Publication:
United States

Citation Formats

. Radio Channel Simulator (RCSM). Computer software. Vers. 00. USDOE. 31 Jan. 2007. Web.
. (2007, January 31). Radio Channel Simulator (RCSM) (Version 00) [Computer software].
. Radio Channel Simulator (RCSM). Computer software. Version 00. January 31, 2007.
@misc{osti_1231346,
title = {Radio Channel Simulator (RCSM), Version 00},
author = {},
abstractNote = {This is a simulation package for making site specific predictions of radio signal strength. The software computes received power at discrete grid points as a function of the transmitter location and propagation environment. It is intended for use with wireless network simulation packages and to support wireless network deployments.},
doi = {},
year = {Wed Jan 31 00:00:00 EST 2007},
month = {Wed Jan 31 00:00:00 EST 2007},
note =
}

Software:
To order this software, request consultation services, or receive further information, please fill out the following request.

Save / Share:
  • The author describe the structure and use of a computer program which simulates the operation of a parallel processor simulation system. The program was developed to support an investigation to determine algorithms which are suitable for simulating continuous systems on a parallel processor configuration. 5 references.
  • The design of ISI's SDI architecture simulator was intended to minimize the software development necessary to add new simulation models to the system or to refine the detail of existing ones. The key software design approach used to accomplish this goal was the modeling of each simulated defense system component by a software object called a 'technology module.' Each technology module provided a carefully defined abstract interface between the component model and the rest of the simulation system, particularly the simulation models of battle managers. This report documents the first test of the validity of this software design approach. Amore » new technology module modeling a kinetic kill vehicle' (KKV) was added to the simulator. Although this technology module had an impact on several parts of the simulation system in the form of new data structures and functions that had to be created, the integration of the new module was accomplished without the necessity of replacing any existing code.« less
  • The paper deals with two requirements for flexible software for research flight-simulation programs: the research environment and the aspects of the multiprocessor computer system. The various projects demand modifications. Scheduling of these projects yields to parallel development of software and hardware. Interference between the projects due to software modifications is avoided by a hierarchical software environment, while simulation test runs can be performed independent from the hardware configuration at that time. Although software development is performed on the computer, there is no need to stop development during simulator operation. The administrative system is not ruling the quality of the software.more » Simple rules on quality assurance are adopted by the simulator group.« less
  • The computer programs on this tape comprise The Master Environmental Control and Mine System Design Simulator for Underground Coal Mining. This simulator is completely documented in an 11-volume report available through NTIS (PB-255 420/AS). The Simulator has a wide range of possible applications in the design and evaluation of underground coal mining systems from the standpoints of health and safety, productivity, and mine environment. It consists of nine free-standing function-oriented subsystem models linked together into an integrated, comprehensive model of an entire mining system. The subsystems which make up the Simulator are Geology and Reserves, Methane Generation, Roof Support, Subsidence,more » Production, Rail Haulage, Cost, Water Generation and Ventilation. In addition to these, there is a Dynamic subsystem in which the production, rail haulage, methane generation and roof support subsystems function interactively on a continuous basis during the simulation of a mining operation. Test data for each of the programs found on this tape are available on BuMines Tape 2-77 (MDS-8). These test data correspond to example applications of each of the subsystems found in the report. The system is written in the Fortran programming language for implementation on an IBM 370/168 computer using the OS version, MVT level operating system. Currently, largest required core storage is 560K bytes, depending on program used. However, fully resident may require 750K bytes of core storage.« less
  • In this paper the authors describe a simulator which can be used to study the effects on circuit behavior of two radiation phenomena: Single Event Upset (SEU) and total-dose radiation effects. Using this simulator the user can predict the error ate in large circuits due to single event upset. The error rate model described here uses a well established methodology, but for the first time a different choice is made on picking up the sensitive nodes, enabling a quick prediction even for very complex circuits. The simulator predicts circuit behavior after total-dose irradiation using as inputs: the dose rate andmore » the total dose, parameter sets that characterize the transistor response to radiation, and the circuit netlist. The total-dose simulator is based on physical models of the changes in the MOSFET caused by radiation. They quantify the degradation of each MOSFET in a circuit with two parameters and determine the change in the MOSFET characteristics from preirradiation MOSFET data. Using the irradiated MOSFET parameters, they can simulate circuit behavior using an ordinary circuit simulator such as SPICE. With this simulator, one can study how resistant a circuit is to changes due to irradiation and design circuits to be functionally radiation hard. The double-kink in the MOSFET subthreshold region due to the parasitic effect of the edge transistors can be simulated and the user is advised when leakage current is unacceptably large. The speed degradation of a ring oscillator was simulated and the results compared with actual measured data.« less

To initiate an order for this software, request consultation services, or receive further information, fill out the request form below. You may also reach us by email at: .

OSTI staff will begin to process an order for scientific and technical software once the payment and signed site license agreement are received. If the forms are not in order, OSTI will contact you. No further action will be taken until all required information and/or payment is received. Orders are usually processed within three to five business days.

Software Request

(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)