skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Electronic Sensor Platform Programmer

Abstract

The ESPP allows users to configure the ESP's operating parameters and enter information that associates each ESP with specific containers and/or physical locations. The ESPP also allows the operator to enter supplemental information for each ESP for display on the user interfaces.If the Material Monitoring System is being used this program can also upload the ESP configuration information to the Data Storage Component (DSC) using a TCP/IP interface.

Authors:
Publication Date:
Research Org.:
Sandia National Laboratories
Sponsoring Org.:
USDOE
OSTI Identifier:
1230954
Report Number(s):
ESPPV5.3.0; 002034IBMPC00
DOE Contract Number:
DE-AC04-94AL85000
Resource Type:
Software
Software Revision:
00
Software Package Number:
002034
Software Package Contents:
Media Directory; Software Abstract; Media includes Source Code; Executable Module(s); and User Guide;/1 CD ROM
Software CPU:
IBMPC
Open Source:
No
Source Code Available:
Yes
Country of Publication:
United States

Citation Formats

Perlinski, Anthony W. Electronic Sensor Platform Programmer. Computer software. Vers. 00. USDOE. 27 Mar. 2006. Web.
Perlinski, Anthony W. (2006, March 27). Electronic Sensor Platform Programmer (Version 00) [Computer software].
Perlinski, Anthony W. Electronic Sensor Platform Programmer. Computer software. Version 00. March 27, 2006.
@misc{osti_1230954,
title = {Electronic Sensor Platform Programmer, Version 00},
author = {Perlinski, Anthony W.},
abstractNote = {The ESPP allows users to configure the ESP's operating parameters and enter information that associates each ESP with specific containers and/or physical locations. The ESPP also allows the operator to enter supplemental information for each ESP for display on the user interfaces.If the Material Monitoring System is being used this program can also upload the ESP configuration information to the Data Storage Component (DSC) using a TCP/IP interface.},
doi = {},
year = {Mon Mar 27 00:00:00 EST 2006},
month = {Mon Mar 27 00:00:00 EST 2006},
note =
}

Software:
To order this software, request consultation services, or receive further information, please fill out the following request.

Save / Share:
  • The SSP Software package allows a user to connect to a CoCIM via a Personality Programmer and: Reset the firmware of the CoCIM using the SSP Personality Programmer. The changes that can be made include things such as: Recovering from a tamper event; Resetting the initialization date and message counter; Change configuration values of the CoCIM using the SSP Seal Configuration or the RMSA Configuration File Editor programs. Configuration values that can be set will depend on what version of the CoCIM firmware is being used, but can include: The IP address of the translator with which this CoCIM (ormore » RMSA) communicates; The number of attempts the CoCIM (or RMSA) will attempt to contact the translator; The primary CoCIM (or RMSA) channel; The secondary CoCIM (or RMSA) channel; Locations of files containing CoCIM (or RMSA) encryption keys SSPSerialDataDumper downloads a CoCIM’s stored messages to a computer connected to the CoCIM via a serial cable; SSPLogAnalyzer decrypts and authenticates messages that have been downloaded using the Serial Data Dumper program and then displays the messages values.« less
  • The author has identified the following significant results. Five LANDSAT data collection platforms were integrated electronically with thermal sensing systems, emplaced and operated in an analog mode at selected thermally significant volcanic and geothermal sites. The DCP's transmitted 3260 messages comprising 26,080 ambient, surface, and near surface temperature records at an accuracy of + or - 1.15 C for 1121 instrument days between November 14, 1972 and April 17, 1974. In harsh, windy, high altitude volcanic environments, the DCP functioned best with a small dipole antenna. Sixteen kg of alkaline batteries provided a viable power supply for the DCP systems,more » operated at a low duty cycle, for 5 to 8 months.« less
  • A wireless monitoring system suitable for a wide range of remote data collection applications. The system includes at least one Electronic Sensor Platform (ESP), an Interrogator Transceiver (IT) and a general purpose host computer. The ESP functions as a remote data collector from a number of digital and analog sensors located therein. The host computer provides for data logging, testing, demonstration, installation checkout, and troubleshooting of the system. The IT transmits signals from one or more ESP's to the host computer to the ESP's. The IT host computer may be powered by a common power supply, and each ESP ismore » individually powered by a battery. This monitoring system has an extremely low power consumption which allows remote operation of the ESP for long periods; provides authenticated message traffic over a wireless network; utilizes state-of-health and tamper sensors to ensure that the ESP is secure and undamaged; has robust housing of the ESP suitable for use in radiation environments; and is low in cost. With one base station (host computer and interrogator transceiver), multiple ESP's may be controlled at a single monitoring site.« less
  • The objective of the Programmer`s Guide for the DMSP SSIES flight data processing software is to provide AFSFC personnel with the information necessary to understand and use the various components of the system. This software has been specifically developed to process the SSIES-2 and SSIES-2A data formats, with provisions for retroactive adaptation to the original SSIES format and future adaptation to the SSIES-3 format. This Programmer`s Guide describes the three programs which constitute the AFSFC SSIES processing system: BNBA, LDCONO2 and APGA. The BNBA program performs data format conversions for the various SSIES telemetry data formats to generate a commonmore » file format for subsequent processing by the APGA program. The LDCONO2 program generates the reference parameter file of satellite and instrument conversion constants and processing options for use by the APGA program. The APGA program performs quality evaluations and analyses of the SSIES telemetry data to create database files and reports of quantities which characterize the ionosphere.« less
  • This booklet was written specifically for anyone who writes computer programs at the Lawrence Berkeley National Laboratory. It is intended to provide basic information on how the law of copyright applies to computer software. It is not intended to be a legal reference for copyright attorneys, but an accessible reference for the people whose creative efforts result in software others want to use. Whether you are a chemist who writes software to help you with your work or a professional Berkeley Lab programmer you should benefit from this booklet. The information in this booklet is written in an informal conversationalmore » style, not a legal style. It is simply a direct response to a need for information that I have observed. Since I have written it from a programmer`s viewpoint and for a programmer`s use, it does not cover copyright law in general and focuses only on those areas of copyright law specific to computer software. Moreover, it does not attempt to address other areas of law that may be applicable to computer software. It is certainly not intended to replace the timely legal advice of Berkeley Lab`s Patent Department. However, just as it is helpful to read the computer manual before calling tech support, it will also be helpful to read this booklet before calling the Patent Department, not so much to answer any and all questions, but to give you the vocabulary to better understand and digest the information provided by the Department.« less

To initiate an order for this software, request consultation services, or receive further information, fill out the request form below. You may also reach us by email at: .

OSTI staff will begin to process an order for scientific and technical software once the payment and signed site license agreement are received. If the forms are not in order, OSTI will contact you. No further action will be taken until all required information and/or payment is received. Orders are usually processed within three to five business days.

Software Request

(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)