skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Generates 2D Input for DYNA NIKE & TOPAZ

Abstract

MAZE is an interactive program that serves as an input and two-dimensional mesh generator for DYNA2D, NIKE2D, TOPAZ2D, and CHEMICAL TOPAZ2D. MAZE also generates a basic template for ISLAND input. MAZE has been applied to the generation of input data to study the response of two-dimensional solids and structures undergoing finite deformations under a wide variety of large deformation transient dynamic and static problems and heat transfer analyses.

Authors:
;
Publication Date:
Research Org.:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Org.:
DOE/DP
OSTI Identifier:
1230109
Report Number(s):
MAZE96*; 000222MLTPL00
DOE Contract Number:
P
Resource Type:
Software
Software Revision:
00
Software Package Number:
000222
Software Package Contents:
Media Directory; Software Abstract; Installation Guides for SUN, IBM, and SGI; New Features in the MDG Codes; Media Includes UCRL-MA-124377, Source Code, Compilation Instructions, Linking Instructions;\ 1 CD Rom
Software CPU:
MLTPL
Open Source:
No
Source Code Available:
Yes
Other Software Info:
The DIGLIB code is included with this package
Related Software:
DYNA2D, TOPAZ2D, NIKE2D, CHEMICAL TOPAZ2D, DIGLIB.
Country of Publication:
United States

Citation Formats

Hallquist, J. O., and Sanford, Larry. Generates 2D Input for DYNA NIKE & TOPAZ. Computer software. Vers. 00. DOE/DP. 15 Jul. 1996. Web.
Hallquist, J. O., & Sanford, Larry. (1996, July 15). Generates 2D Input for DYNA NIKE & TOPAZ (Version 00) [Computer software].
Hallquist, J. O., and Sanford, Larry. Generates 2D Input for DYNA NIKE & TOPAZ. Computer software. Version 00. July 15, 1996.
@misc{osti_1230109,
title = {Generates 2D Input for DYNA NIKE & TOPAZ, Version 00},
author = {Hallquist, J. O. and Sanford, Larry},
abstractNote = {MAZE is an interactive program that serves as an input and two-dimensional mesh generator for DYNA2D, NIKE2D, TOPAZ2D, and CHEMICAL TOPAZ2D. MAZE also generates a basic template for ISLAND input. MAZE has been applied to the generation of input data to study the response of two-dimensional solids and structures undergoing finite deformations under a wide variety of large deformation transient dynamic and static problems and heat transfer analyses.},
doi = {},
year = {Mon Jul 15 00:00:00 EDT 1996},
month = {Mon Jul 15 00:00:00 EDT 1996},
note =
}

Software:
To order this software, request consultation services, or receive further information, please fill out the following request.

Save / Share:
  • MAZE is an interactive input generator for two-dimensional finite element codes. MAZE has three phases. In the first phase, lines and parts are defined. The first phase is terminated by the `ASSM` or `PASSM` command which merges all parts. In the second phase, boundary conditions may be specified, slidelines may be defined, parts may be merged to eliminate nodes along common interfaces, boundary nodes may be moved for graded zoning, the mesh may be smoothed, and load curves may be defined. The second phase is terminated by the `WBCD` command which causes MAZE to write the output file as soonmore » as the `T` terminate command is typed. In the third phase, material properties may be defined. Commands that apply to the first phase may not be used in the second or third; likewise, commands that apply in the second may not be used in the first and third, or commands that apply in the third in the first and second. Nine commands - TV, Z, GSET, PLOTS, GRID, NOGRID, FRAME, NOFRAME, and RJET are available in all phases. Comments may be added anywhere in the input stream by prefacing the comment with `C`. Any DYNA2D or NIKE2D material and equation-of-state model may be defined via the MAT and EOS commands, respectively. MAZE may be terminated after phase two; it is not necessary to define the materials.« less
  • MAZE is an interactive input generator for two-dimensional finite element codes. MAZE has three phases. In the first phase, lines and parts are defined. The first phase is terminated by the `ASSM` or `PASSM` command which merges all parts. In the second phase, boundary conditions may be specified, slidelines may be defined, parts may be merged to eliminate nodes along common interfaces, boundary nodes may be moved for graded zoning, the mesh may be smoothed, and load curves may be defined. The second phase is terminated by the `WBCD` command which causes MAZE to write the output file as soonmore » as the `T` terminate command is typed. In the third phase, material properties may be defined. Commands that apply to the first phase may not be used in the second or third; likewise, commands that apply in the second may not be used in the first and third, or commands that apply in the third in the first and second. Nine commands - TV, Z, GSET, PLOTS, GRID, NOGRID, FRAME, NOFRAME, and RJET are available in all phases. Comments may be added anywhere in the input stream by prefacing the comment with `C`. Any DYNA2D or NIKE2D material and equation-of-state model may be defined via the MAT and EOS commands, respectively. MAZE may be terminated after phase two; it is not necessary to define the materials.« less
  • MAZE is an interactive input generator for two-dimensional finite element codes. MAZE has three phases. In the first phase, lines and parts are defined. The first phase is terminated by the `ASSM` or `PASSM` command which merges all parts. In the second phase, boundary conditions may be specified, slidelines may be defined, parts may be merged to eliminate nodes along common interfaces, boundary nodes may be moved for graded zoning, the mesh may be smoothed, and load curves may be defined. The second phase is terminated by the `WBCD` command which causes MAZE to write the output file as soonmore » as the `T` terminate command is typed. In the third phase, material properties may be defined. Commands that apply to the first phase may not be used in the second or third; likewise, commands that apply in the second may not be used in the first and third, or commands that apply in the third in the first and second. Nine commands - TV, Z, GSET, PLOTS, GRID, NOGRID, FRAME, NOFRAME, and RJET are available in all phases. Comments may be added anywhere in the input stream by prefacing the comment with `C`. Any DYNA2D or NIKE2D material and equation-of-state model may be defined via the MAT and EOS commands, respectively. MAZE may be terminated after phase two; it is not necessary to define the materials.« less
  • MAZE is an interactive input generator for two-dimensional finite element codes. MAZE has three phases. In the first phase, lines and parts are defined. The first phase is terminated by the `ASSM` or `PASSM` command which merges all parts. In the second phase, boundary conditions may be specified, slidelines may be defined, parts may be merged to eliminate nodes along common interfaces, boundary nodes may be moved for graded zoning, the mesh may be smoothed, and load curves may be defined. The second phase is terminated by the `WBCD` command which causes MAZE to write the output file as soonmore » as the `T` terminate command is typed. In the third phase, material properties may be defined. Commands that apply to the first phase may not be used in the second or third; likewise, commands that apply in the second may not be used in the first and third, or commands that apply in the third in the first and second. Nine commands - TV, Z, GSET, PLOTS, GRID, NOGRID, FRAME, NOFRAME, and RJET are available in all phases. Comments may be added anywhere in the input stream by prefacing the comment with `C`. Any DYNA2D or NIKE2D material and equation-of-state model may be defined via the MAT and EOS commands, respectively. MAZE may be terminated after phase two; it is not necessary to define the materials.« less
  • MAZE is an interactive input generator for two-dimensional finite element codes. MAZE has three phases. In the first phase, lines and parts are defined. The first phase is terminated by the `ASSM` or `PASSM` command which merges all parts. In the second phase, boundary conditions may be specified, slidelines may be defined, parts may be merged to eliminate nodes along common interfaces, boundary nodes may be moved for graded zoning, the mesh may be smoothed, and load curves may be defined. The second phase is terminated by the `WBCD` command which causes MAZE to write the output file as soonmore » as the `T` terminate command is typed. In the third phase, material properties may be defined. Commands that apply to the first phase may not be used in the second or third; likewise, commands that apply in the second may not be used in the first and third, or commands that apply in the third in the first and second. Nine commands - TV, Z, GSET, PLOTS, GRID, NOGRID, FRAME, NOFRAME, and RJET are available in all phases. Comments may be added anywhere in the input stream by prefacing the comment with `C`. Any DYNA2D or NIKE2D material and equation-of-state model may be defined via the MAT and EOS commands, respectively. MAZE may be terminated after phase two; it is not necessary to define the materials.« less

To initiate an order for this software, request consultation services, or receive further information, fill out the request form below. You may also reach us by email at: .

OSTI staff will begin to process an order for scientific and technical software once the payment and signed site license agreement are received. If the forms are not in order, OSTI will contact you. No further action will be taken until all required information and/or payment is received. Orders are usually processed within three to five business days.

Software Request

(required)
(required)
(required)
(required)
(required)
(required)
(required)
(required)