skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Quasi-three-dimensional analysis for composite cylinder under lateral compressive loading

Abstract

This paper presents a lateral compressive analytical method for CFRP cylinders using a quasi-three-dimensional model. This numerical model was constructed by shell and beam elements which represent fiber and resin respectively. The lateral compressive behaviors of CFRP cylinders with [{theta}/{minus}{theta}]sym ({theta} = 15{degree}, 30{degree}, 45{degree}, 60{degree}) were experimentally evaluated. The damage propagation was simulated using the quasi-three-dimensional model. The transverse cracking and interlaminar delamination were simulated independently. Furthermore comparing the analytical and experimental results, it is confirmed that the proposed analytical method is precise.

Authors:
 [1];  [2]; ;  [3];  [4]
  1. ASICS Corporation, Kobe (Japan)|[Kyoto Inst. of Tech. (Japan)
  2. Mie Univ. (Japan)
  3. Kyoto Inst. of Tech. (Japan)
  4. ASICS Corporation, Kobe (Japan)
Publication Date:
OSTI Identifier:
122525
Report Number(s):
CONF-950740-
ISBN 0-7918-1333-9; TRN: IM9547%%105
Resource Type:
Book
Resource Relation:
Conference: Joint American Society of Mechanical Engineers (ASME)/Japan Society of Mechanical Engineers (JSME) pressure vessels and piping conference, Honolulu, HI (United States), 23-27 Jul 1995; Other Information: PBD: 1995; Related Information: Is Part Of Composites for the pressure vessel industry. PVP-Volume 302; Bees, W.J.; Newaz, G.M.; Narita, Yoshihiro; Takezono, S.; Qatu, M.S.; Hirano, T.; Miyazaki, N.; Nakagaki, M. [eds.]; PB: 312 p.
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES; 36 MATERIALS SCIENCE; CARBON FIBERS; DAMAGE; REINFORCED PLASTICS; MECHANICAL STRUCTURES; COMPOSITE MATERIALS; ANALYTICAL SOLUTION; MATHEMATICAL MODELS; THREE-DIMENSIONAL CALCULATIONS; CRACK PROPAGATION; FAILURES; COMPRESSION; COMPRESSION STRENGTH; THEORETICAL DATA

Citation Formats

Nishiwaki, Tsuyoshi, Yokoyama, Atsushi, Maekawa, Zenichiro, Hamada, Hiroyuki, and Mori, Sadaki. Quasi-three-dimensional analysis for composite cylinder under lateral compressive loading. United States: N. p., 1995. Web.
Nishiwaki, Tsuyoshi, Yokoyama, Atsushi, Maekawa, Zenichiro, Hamada, Hiroyuki, & Mori, Sadaki. Quasi-three-dimensional analysis for composite cylinder under lateral compressive loading. United States.
Nishiwaki, Tsuyoshi, Yokoyama, Atsushi, Maekawa, Zenichiro, Hamada, Hiroyuki, and Mori, Sadaki. 1995. "Quasi-three-dimensional analysis for composite cylinder under lateral compressive loading". United States. doi:.
@article{osti_122525,
title = {Quasi-three-dimensional analysis for composite cylinder under lateral compressive loading},
author = {Nishiwaki, Tsuyoshi and Yokoyama, Atsushi and Maekawa, Zenichiro and Hamada, Hiroyuki and Mori, Sadaki},
abstractNote = {This paper presents a lateral compressive analytical method for CFRP cylinders using a quasi-three-dimensional model. This numerical model was constructed by shell and beam elements which represent fiber and resin respectively. The lateral compressive behaviors of CFRP cylinders with [{theta}/{minus}{theta}]sym ({theta} = 15{degree}, 30{degree}, 45{degree}, 60{degree}) were experimentally evaluated. The damage propagation was simulated using the quasi-three-dimensional model. The transverse cracking and interlaminar delamination were simulated independently. Furthermore comparing the analytical and experimental results, it is confirmed that the proposed analytical method is precise.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = 1995,
month =
}

Book:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this book.

Save / Share:
  • Quantitative information on the performance of building envelope components as a function of time is seriously lacking. Designing for the durability and service life of building systems has not reached a stage of maturity as many key issues have not yet been analyzed. Total performance in terms of designed life-span durability requires the integration of various performances that deal with hygrothermal transport, structural loading, and chemical and biological activities. To date, limited work is available that encompasses this spectrum of multidisciplinary activity. This paper presents a new durability model as the first step toward the development of an analytical toolmore » to assist in the design attributes/considerations of hygrothermoelasto-plasticity of building wall assemblies. The development of an uncoupled quasi-static hygrothermoelasticity model for two-dimensional composite building envelope systems is discussed. To demonstrate the capability of this model for durability analysis, an application case is presented for a building wall assembly. An English bond masonry wall system, exposed to actual weather, heat, air, and moisture transport boundary conditions for the city of Ottawa, is analyzed. Hygrothermal-elastic numerical results show that high magnitudes of shearing stress are concentrated in the mortar layer, which is consistent with empirical knowledge on the deterioration of masonry walls. In addition, the direct coupling effects of weather and the hygrothermal response of the wall system on the structural behavior is clearly identified during periods of wind-driven rain.« less
  • Transient heat conduction and thermal stress analysis of laminated composite materials are very important because they are hated during manufacturing process. Anisotropy of thermal conductivity has to be considered for heat conduction analysis of composite materials such as FRP. Assuming that heat conducts uniformly in normal direction in thin structures, laminated plates can be modeled as single layers with the equivalent heat conductivities. With this assumption, FEM three dimensional transient heat conduction and thermal stress analysis programs for laminated composite materials are developed. As numerical examples, the heat conduction and thermal stresses of laminated CFRP structure are investigated.
  • Pressure vessels and piping structures made of composite materials are being increasingly used, primarily because of the large values of specific strength and stiffness which may be obtained in comparison with conventional materials, such as metals. The composite structure may be considered as an assemblage of plate and shell components, likewise in conventional metal structures, and the vibration of composite plates and shells constitutes an important area in applied mechanics. Here, a method of analysis is presented for solving the free vibration problem of a rectangular parallelepiped. The parallelepiped is made of an undirectionally reinforced fiber composite, which is modeledmore » to have rectangular orthotropy. The method is based on the Ritz method, and accommodates arbitrary boundary conditions on the six faces by introducing the boundary indices into the displacement functions. Numerical results are given for the first several frequencies of isotropic and orthotropic parallelepipeds, including the cube, and are compared to the existing results by other theories.« less
  • A physically based micromechanical model is applied to study finite compressive deformation and failure in lamellar TiAl microstructures. Orientation dependent yielding of lamellar TiAl single crystals is specifically modeled. Finite element computations show that deformation is inherently non-uniform in the lamellar microstructure. Intergranular fracture (at low strains) and internal buckling (at high strains) are found to be two of the most important failure modes.
  • Strength and stress-strain properties of plain woven glass fabric composites were measured under three different loading paths which gave the same final stress state. Thin-walled tubular specimens were used. In the present study, the progressive damage was focused. In all tests, acoustic emissions (AE) were measured for distinguishing damage accumulation such as debonding, matrix cracking and fiber breakage. Failed specimens were observed using an optical microscope. Based on the experimental results, a new yield criterion for glass fabric composites was proposed. Damage accumulation and its sequence were both affected by loading path. The S-S relations up to failure were affectedmore » by biaxial stress ratio {alpha} (the ratio between normal and shear stresses) and loading path. However, the strength did not depend on loading path. The material failure was governed by the final stress condition regardless the difference of loading path.« less