Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico
Abstract
Hydrate-bearing sands are being actively explored because they contain the highest concentrations of hydrate and are the most economically recoverable hydrate resource. However, relatively little is known about the mechanisms or timescales of hydrate formation, which are related to methane supply, fluid flux, and host sediment properties such as permeability. We used logging-while-drilling data from locations in the northern Gulf of Mexico to develop an effective medium theory-based model for predicting permeability based on clay-sized sediment fraction. The model considers permeability varying between sand and clay endpoint permeabilities that are defined from laboratory data. We verified the model using permeability measurements on core samples from three boreholes, and then used the model to predict permeability in two wells drilled in Walker Ridge Block 313 during the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II expedition in 2009. We found that the cleanest sands (clay-sized fraction <0.05) had intrinsic (hydrate-free) permeability contrasts of 5-6 orders of magnitude with the surrounding clays, which is sufficient to provide focused hydrate formation due to advection of methane from a deep source or diffusion of microbial methane from nearby clay layers. In sands where the clay-sized fraction exceeds 0.05, the permeability reduces significantlymore »
- Authors:
-
- Univ. of Texas at Austin, Austin, TX (United States)
- The Ohio State Univ., Columbus, OH (United States)
- Lamont-Doherty Earth Observatory of Columbia Univ., Palisades, NY (United States)
- Publication Date:
- Research Org.:
- Univ. of Texas at Austin, Austin, TX (United States)
- Sponsoring Org.:
- USDOE Office of Fossil Energy (FE)
- OSTI Identifier:
- 1223537
- Alternate Identifier(s):
- OSTI ID: 1249817
- Grant/Contract Number:
- FE0013919
- Resource Type:
- Journal Article: Accepted Manuscript
- Journal Name:
- Marine and Petroleum Geology
- Additional Journal Information:
- Journal Volume: 68; Journal Issue: PA; Journal ID: ISSN 0264-8172
- Publisher:
- Elsevier
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 58 GEOSCIENCES; Walker Ridge; methane hydrates; permeability; effective medium theory; Integrated Ocean Drilling Program
Citation Formats
Daigle, Hugh, Cook, Ann, and Malinverno, Alberto. Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico. United States: N. p., 2015.
Web. doi:10.1016/j.marpetgeo.2015.10.004.
Daigle, Hugh, Cook, Ann, & Malinverno, Alberto. Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico. United States. https://doi.org/10.1016/j.marpetgeo.2015.10.004
Daigle, Hugh, Cook, Ann, and Malinverno, Alberto. Wed .
"Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico". United States. https://doi.org/10.1016/j.marpetgeo.2015.10.004. https://www.osti.gov/servlets/purl/1223537.
@article{osti_1223537,
title = {Permeability and porosity of hydrate-bearing sediments in the northern Gulf of Mexico},
author = {Daigle, Hugh and Cook, Ann and Malinverno, Alberto},
abstractNote = {Hydrate-bearing sands are being actively explored because they contain the highest concentrations of hydrate and are the most economically recoverable hydrate resource. However, relatively little is known about the mechanisms or timescales of hydrate formation, which are related to methane supply, fluid flux, and host sediment properties such as permeability. We used logging-while-drilling data from locations in the northern Gulf of Mexico to develop an effective medium theory-based model for predicting permeability based on clay-sized sediment fraction. The model considers permeability varying between sand and clay endpoint permeabilities that are defined from laboratory data. We verified the model using permeability measurements on core samples from three boreholes, and then used the model to predict permeability in two wells drilled in Walker Ridge Block 313 during the Gulf of Mexico Gas Hydrate Joint Industry Project Leg II expedition in 2009. We found that the cleanest sands (clay-sized fraction <0.05) had intrinsic (hydrate-free) permeability contrasts of 5-6 orders of magnitude with the surrounding clays, which is sufficient to provide focused hydrate formation due to advection of methane from a deep source or diffusion of microbial methane from nearby clay layers. In sands where the clay-sized fraction exceeds 0.05, the permeability reduces significantly and focused flow is less pronounced. In these cases, diffusion of dissolved microbial methane is most likely the preferred mode of methane supply for hydrate formation. In conclusion, our results provide important constraints on methane supply mechanisms in the Walker Ridge area and have global implications for evaluating rates of methane migration and hydrate formation in hydrate-bearing sands.},
doi = {10.1016/j.marpetgeo.2015.10.004},
url = {https://www.osti.gov/biblio/1223537},
journal = {Marine and Petroleum Geology},
issn = {0264-8172},
number = PA,
volume = 68,
place = {United States},
year = {2015},
month = {10}
}
Web of Science
Works referencing / citing this record:
Linking basin-scale and pore-scale gas hydrate distribution patterns in diffusion-dominated marine hydrate systems: DIFFUSION-DRIVEN HYDRATE GROWTH IN SANDS
journal, February 2017
- Nole, Michael; Daigle, Hugh; Cook, Ann E.
- Geochemistry, Geophysics, Geosystems, Vol. 18, Issue 2
Laboratory Insights Into the Effect of Sediment‐Hosted Methane Hydrate Morphology on Elastic Wave Velocity From Time‐Lapse 4‐D Synchrotron X‐Ray Computed Tomography
journal, November 2018
- Sahoo, Sourav K.; Madhusudhan, B. N.; Marín‐Moreno, Hector
- Geochemistry, Geophysics, Geosystems, Vol. 19, Issue 11