Production Facility Prototype Blower Installation Report
Abstract
The roots blower in use at ANL for in-beam experiments and also at LANL for flow tests was sized for 12 mm diameter disks and significantly less beam heating. Currently, the disks are 29 mm in diameter, with a 12 mm FWHM Gaussian beam spot at 42 MeV and 2.86 μA on each side of the target, 5.72 μA total. The target design itself is reported elsewhere. With the increased beam heating, the helium flow requirement increased so that a larger blower was need for a mass flow rate of 400 g/s at 2.76 MPa (400 psig). An Aerzen GM 12.4 blower was selected, and is currently being installed at the LANL facility for target and component flow testing. This report describes this blower/motor/ppressure vessel package and the status of the facility preparations.
- Authors:
-
- Los Alamos National Lab. (LANL), Los Alamos, NM (United States)
- Publication Date:
- Research Org.:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Org.:
- USDOE
- OSTI Identifier:
- 1207739
- Report Number(s):
- LA-UR-15-25044
- DOE Contract Number:
- AC52-06NA25396
- Resource Type:
- Technical Report
- Country of Publication:
- United States
- Language:
- English
- Subject:
- Engineering(42); Particle Accelerators(43); Accelerator Design, Technology, and Operations
Citation Formats
Woloshun, Keith Albert, Dale, Gregory E., Dalmas, Dale Allen, and Romero, Frank Patrick. Production Facility Prototype Blower Installation Report. United States: N. p., 2015.
Web. doi:10.2172/1207739.
Woloshun, Keith Albert, Dale, Gregory E., Dalmas, Dale Allen, & Romero, Frank Patrick. Production Facility Prototype Blower Installation Report. United States. https://doi.org/10.2172/1207739
Woloshun, Keith Albert, Dale, Gregory E., Dalmas, Dale Allen, and Romero, Frank Patrick. 2015.
"Production Facility Prototype Blower Installation Report". United States. https://doi.org/10.2172/1207739. https://www.osti.gov/servlets/purl/1207739.
@article{osti_1207739,
title = {Production Facility Prototype Blower Installation Report},
author = {Woloshun, Keith Albert and Dale, Gregory E. and Dalmas, Dale Allen and Romero, Frank Patrick},
abstractNote = {The roots blower in use at ANL for in-beam experiments and also at LANL for flow tests was sized for 12 mm diameter disks and significantly less beam heating. Currently, the disks are 29 mm in diameter, with a 12 mm FWHM Gaussian beam spot at 42 MeV and 2.86 μA on each side of the target, 5.72 μA total. The target design itself is reported elsewhere. With the increased beam heating, the helium flow requirement increased so that a larger blower was need for a mass flow rate of 400 g/s at 2.76 MPa (400 psig). An Aerzen GM 12.4 blower was selected, and is currently being installed at the LANL facility for target and component flow testing. This report describes this blower/motor/ppressure vessel package and the status of the facility preparations.},
doi = {10.2172/1207739},
url = {https://www.osti.gov/biblio/1207739},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Tue Jul 28 00:00:00 EDT 2015},
month = {Tue Jul 28 00:00:00 EDT 2015}
}