skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Measurement of the Dynamic Beta-Gamma Phase Boundary in Tin.

Abstract

Abstract not provided.

Authors:
;
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1148058
Report Number(s):
SAND2007-3697C
522811
DOE Contract Number:
AC04-94AL85000
Resource Type:
Conference
Resource Relation:
Conference: Proposed for presentation at the 15th APS Topical Group Conference on Shock Compression of Condensed Matter held June 24-29, 2007 in Kohala Coast, HI.
Country of Publication:
United States
Language:
English

Citation Formats

Davis, Jean-Paul, and Hayes, Dennis B. Measurement of the Dynamic Beta-Gamma Phase Boundary in Tin.. United States: N. p., 2007. Web.
Davis, Jean-Paul, & Hayes, Dennis B. Measurement of the Dynamic Beta-Gamma Phase Boundary in Tin.. United States.
Davis, Jean-Paul, and Hayes, Dennis B. Fri . "Measurement of the Dynamic Beta-Gamma Phase Boundary in Tin.". United States. doi:. https://www.osti.gov/servlets/purl/1148058.
@article{osti_1148058,
title = {Measurement of the Dynamic Beta-Gamma Phase Boundary in Tin.},
author = {Davis, Jean-Paul and Hayes, Dennis B.},
abstractNote = {Abstract not provided.},
doi = {},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Fri Jun 01 00:00:00 EDT 2007},
month = {Fri Jun 01 00:00:00 EDT 2007}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share:
  • Abstract not provided.
  • Abstract not provided.
  • The concept of external cooling of core melt by cavity flooding has been considered a desirable means of decay heat removal during a severe core-meltdown accident in an advanced light water reactor. In this concept, the decay heat generated in the melt is removed from the external bottom surface of the reactor vessel by downward facing boiling of water in the flooded cavity. The feasibility of this concept depends largely on the critical heat flux on the bottom surface of the reactor vessel. For the case in which the critical heat flux is higher than the local heat flux frommore » the core melt, nucleate boiling will be the prevailing mode of heat transfer. The wall temperatures can be maintained well below the failure temperature of the steel structure. However, if the downward facing boiling situation and the thermal loading conditions are such that the local heat flux from the core melt exceeds the critical heat flux, then transition to film boiling will occur on the external bottom surface. Under such circumstances, the wall temperatures could rise rapidly toward the failure temperature of the steel structure, and the integrity of the reactor lower head could be severely jeopardized.« less
  • This paper reports on sintering behavior of mixed {alpha}{prime}/{beta}{prime} sialon ceramics, fabricated from {alpha} - Si{sub 3}N{sub 4}, AlN and Ln{sub 2}O{sub 3} (Y{sub 2}O{sub 3}, Er{sub 2}O{sub 3} and Yb{sub 2}O{sub 3}), and discusses the densification process by considering the chemical reactions to form {alpha}{prime} - and {beta}{prime} - sialon and the kinetical analysis of shrinkage. The quantity and character of the intergranular phase in mixed {alpha}{prime}/{beta}{prime} sialon ceramics are also evaluated by internal friction measurements.
  • On behalf of the BABAR and Belle collaborations, the authors report on the measurement of the angle {gamma} and of the sum of angles 2{beta} + {gamma} of the Unitarity Triangle.