skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: An analytical elastic plastic contact model with strain hardening and frictional effects for normal and oblique impacts

Abstract

Impact between metallic surfaces is a phenomenon that is ubiquitous in the design and analysis of mechanical systems. We found that to model this phenomenon, a new formulation for frictional elastic–plastic contact between two surfaces is developed. The formulation is developed to consider both frictional, oblique contact (of which normal, frictionless contact is a limiting case) and strain hardening effects. The constitutive model for normal contact is developed as two contiguous loading domains: the elastic regime and a transitionary region in which the plastic response of the materials develops and the elastic response abates. For unloading, the constitutive model is based on an elastic process. Moreover, the normal contact model is assumed to only couple one-way with the frictional/tangential contact model, which results in the normal contact model being independent of the frictional effects. Frictional, tangential contact is modeled using a microslip model that is developed to consider the pressure distribution that develops from the elastic–plastic normal contact. This model is validated through comparisons with experimental results reported in the literature, and is demonstrated to be significantly more accurate than 10 other normal contact models and three other tangential contact models found in the literature.

Authors:
 [1]
  1. Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Publication Date:
Research Org.:
Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
Sponsoring Org.:
USDOE National Nuclear Security Administration (NNSA)
OSTI Identifier:
1146110
Report Number(s):
SAND-2014-4365J
Journal ID: ISSN 0020-7683; PII: S002076831500058X
Grant/Contract Number:
AC04-94AL85000
Resource Type:
Journal Article: Accepted Manuscript
Journal Name:
International Journal of Solids and Structures
Additional Journal Information:
Journal Volume: 62; Journal Issue: C; Journal ID: ISSN 0020-7683
Publisher:
Elsevier
Country of Publication:
United States
Language:
English
Subject:
36 MATERIALS SCIENCE; contact mechanics; constitutive behavior; elastic plastic material; indentation and hardness; friction

Citation Formats

Brake, M. R. W. An analytical elastic plastic contact model with strain hardening and frictional effects for normal and oblique impacts. United States: N. p., 2015. Web. doi:10.1016/j.ijsolstr.2015.02.018.
Brake, M. R. W. An analytical elastic plastic contact model with strain hardening and frictional effects for normal and oblique impacts. United States. doi:10.1016/j.ijsolstr.2015.02.018.
Brake, M. R. W. Tue . "An analytical elastic plastic contact model with strain hardening and frictional effects for normal and oblique impacts". United States. doi:10.1016/j.ijsolstr.2015.02.018. https://www.osti.gov/servlets/purl/1146110.
@article{osti_1146110,
title = {An analytical elastic plastic contact model with strain hardening and frictional effects for normal and oblique impacts},
author = {Brake, M. R. W.},
abstractNote = {Impact between metallic surfaces is a phenomenon that is ubiquitous in the design and analysis of mechanical systems. We found that to model this phenomenon, a new formulation for frictional elastic–plastic contact between two surfaces is developed. The formulation is developed to consider both frictional, oblique contact (of which normal, frictionless contact is a limiting case) and strain hardening effects. The constitutive model for normal contact is developed as two contiguous loading domains: the elastic regime and a transitionary region in which the plastic response of the materials develops and the elastic response abates. For unloading, the constitutive model is based on an elastic process. Moreover, the normal contact model is assumed to only couple one-way with the frictional/tangential contact model, which results in the normal contact model being independent of the frictional effects. Frictional, tangential contact is modeled using a microslip model that is developed to consider the pressure distribution that develops from the elastic–plastic normal contact. This model is validated through comparisons with experimental results reported in the literature, and is demonstrated to be significantly more accurate than 10 other normal contact models and three other tangential contact models found in the literature.},
doi = {10.1016/j.ijsolstr.2015.02.018},
journal = {International Journal of Solids and Structures},
number = C,
volume = 62,
place = {United States},
year = {Tue Feb 17 00:00:00 EST 2015},
month = {Tue Feb 17 00:00:00 EST 2015}
}

Journal Article:
Free Publicly Available Full Text
Publisher's Version of Record

Citation Metrics:
Cited by: 14 works
Citation information provided by
Web of Science

Save / Share: