Efficient Regeneration of Physical and Chemical Solvents for CO2 Capture
- Univ. of North Dakota, Grand Forks, ND (United States)
The objective of this project was to evaluate the use of composite polymer membranes and porous membrane contactors to regenerate physical and chemical solvents for capture of carbon dioxide (CO2) from synthesis gas or flue gas, with the goal of improving the energy efficiency of carbon capture. Both a chemical solvent (typical for a post-combustion capture of CO2 from flue gas) and a physical solvent (typical for pre- combustion capture of CO2 from syngas) were evaluated using two bench-scale test systems constructed for this project. For chemical solvents, polytetrafluoroethylene and polypropylene membranes were found to be able to strip CO2 from a monoethanolamine (MEA) solution with high selectivity without significant degradation of the material. As expected, the regeneration temperature was the most significant parameter affecting the CO2 flux through the membrane. Pore size was also found to be important, as pores larger than 5 microns lead to excessive pore wetting. For physical solvents, polydimethyl-siloxane (PDMS)-based membranes were found to have a higher CO2 permeability than polyvinylalcohol (PVOH) based membranes, while also minimizing solvent loss. Overall, however, the recovery of CO2 in these systems is low – less than 2% for both chemical and physical solvents – primarily due to the small surface area of the membrane test apparatus. To obtain the higher regeneration rates needed for this application, a much larger surface area would be needed. Further experiments using, for example, a hollow fiber membrane module could determine if this process could be commercially viable.
- Research Organization:
- Univ. of North Dakota, Grand Forks, ND (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- FE0002196
- OSTI ID:
- 1113825
- Country of Publication:
- United States
- Language:
- English
Similar Records
AOI2 - Initial Engineering, Testing, and Design of a Commercial-Scale Postcombustion CO2 Capture System on an Existing Coal-Fired Generating Unit (Project Carbon)
AOI2 - Initial Engineering, Testing, and Design of a Commercial-Scale Postcombustion CO2 Capture System on an Existing Coal-Fired Generating Unit (Project Carbon) (Final Report)