skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Mill Seat Landfill Bioreactor Renewable Green Power (NY)

Abstract

The project was implemented at the Mill Seat landfill located in the Town of Bergen, Monroe County, New York. The landfill was previously equipped with a landfill gas collection system to collect methane gas produced by the bioreactor landfill and transport it to a central location for end use. A landfill gas to energy facility was also previously constructed at the site, which utilized generator engines, designed to be powered with landfill methane gas, to produce electricity, to be utilized on site and to be sold to the utility grid. The landfill gas generation rate at the site had exceeded the capacity of the existing generators, and the excess landfill gas was therefore being burned at a candlestick flare for destruction. The funded project consisted of the procurement and installation of two (2) additional 800 KW Caterpillar 3516 generator engines, generator sets, switchgear and ancillary equipment.

Authors:
Publication Date:
Research Org.:
Monroe County, New York
Sponsoring Org.:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
OSTI Identifier:
1051540
Report Number(s):
DOE/FG36-08GO88060
DOE Contract Number:
FG36-08GO88060
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
09 BIOMASS FUELS

Citation Formats

Barton & Loguidice, P.C.. Mill Seat Landfill Bioreactor Renewable Green Power (NY). United States: N. p., 2010. Web. doi:10.2172/1051540.
Copy to clipboard
Barton & Loguidice, P.C.. Mill Seat Landfill Bioreactor Renewable Green Power (NY). United States. doi:10.2172/1051540.
Copy to clipboard
Barton & Loguidice, P.C.. Thu . "Mill Seat Landfill Bioreactor Renewable Green Power (NY)". United States. doi:10.2172/1051540. https://www.osti.gov/servlets/purl/1051540.
Copy to clipboard
@article{osti_1051540,
title = {Mill Seat Landfill Bioreactor Renewable Green Power (NY)},
author = {Barton & Loguidice, P.C.},
abstractNote = {The project was implemented at the Mill Seat landfill located in the Town of Bergen, Monroe County, New York. The landfill was previously equipped with a landfill gas collection system to collect methane gas produced by the bioreactor landfill and transport it to a central location for end use. A landfill gas to energy facility was also previously constructed at the site, which utilized generator engines, designed to be powered with landfill methane gas, to produce electricity, to be utilized on site and to be sold to the utility grid. The landfill gas generation rate at the site had exceeded the capacity of the existing generators, and the excess landfill gas was therefore being burned at a candlestick flare for destruction. The funded project consisted of the procurement and installation of two (2) additional 800 KW Caterpillar 3516 generator engines, generator sets, switchgear and ancillary equipment.},
doi = {10.2172/1051540},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Thu Jan 07 00:00:00 EST 2010},
month = {Thu Jan 07 00:00:00 EST 2010}
}
Copy to clipboard
Technical Report:
View Technical Report (0.01 MB)
DOI:  10.2172/1051540
Save / Share:
Export Metadata
Save to My Library
You must Sign In or Create an Account in order to save documents to your library.

  • ; ;
    No abstract prepared.

  • The Guide to Purchasing Green Power is intended for organizations that are considering the merits of buying green power as well as those that have decided to buy it and want help doing so. The Guide was written for a broad audience, including businesses, government agencies, universities, and all organizations wanting to diversify their energy supply and to reduce the environmental impact of their electricity use.The Guide provides an overview of green power markets and describes the necessary steps to buying green power. This section summarizes the Guide to help readers find the information they need.

  • ;
    The U.S. Environmental Protection Agency (EPA), in accordance with the RE-Powering America's Land initiative, selected the Lakeview Uranium Mill site in Lakeview, Oregon, for a feasibility study of renewable energy production. The EPA contracted with the National Renewable Energy Laboratory (NREL) to provide technical assistance for the project. The purpose of this report is to describe an assessment of the site for possible development of a geothermal power generation facility and to estimate the cost, performance, and site impacts for the facility. In addition, the report recommends development pathways that could assist in the implementation of a geothermal power systemmore » at the site.« less

  • ; ;
    A bioreactor landfill cell with 1.2-acre footprint was constructed, filled, operated, and monitored at Northern Oaks Recycling and Disposal Facility (NORDF) at Harrison, MI. With a filled volume of 74,239 cubic yards, the cell contained approximately 35,317 tons of municipal solid waste (MSW) and 20,777 tons of cover soil. It was laid on the slope of an existing cell but separated by a geosynthetic membrane liner. After the cell reached a design height of 60 feet, it was covered with a geosynthetic membrane cap. A three-dimensional monitoring system to collect data at 48 different locations was designed and installed duringmore » the construction phase of the bioreactor cell. Each location had a cluster of monitoring devices consisting of a probe to monitor moisture and temperature, a leachate collection basin, and a gas sampling port. An increase in moisture content of the MSW in the bioreactor cell was achieved by pumping leachate collected on-site from various other cells, as well as recirculation of leachate from the bioreactor landfill cell itself. Three types of leachate injection systems were evaluated in this bioreactor cell for their efficacy to distribute pumped leachate uniformly: a leachate injection pipe buried in a 6-ft wide horizontal stone mound, a 15-ft wide geocomposite drainage layer, and a 60-ft wide geocomposite drainage layer. All leachate injection systems were installed on top of the compacted waste surface. The distribution of water and resulting MSW moisture content throughout the bioreactor cell was found to be similar for the three designs. Water coming into and leaving the cell (leachate pumped in, precipitation, snow, evaporation, and collected leachate) was monitored in order to carry out a water balance. Using a leachate injection rate of 26 – 30 gal/yard3, the average moisture content increased from 25% to 35% (wet based) over the period of this study. One of the key aspects of this bioreactor landfill study was to evaluate bioreactor start up and performance in locations with colder climate. For lifts filled during the summer months, methane generation started within three months after completion of the lift. For lifts filled in winter months, very little methane production occurred even eight months after filling. The temperature data indicated that subzero or slightly above zero (oC) temperatures persisted for unusually long periods (more than six months) in the lifts filled during winter months. This was likely due to the high thermal insulation capability of the MSW and the low level of biological activity during start up. This observation indicates that bioreactor landfills located in cold climate and filled during winter months may require mechanisms to increase temperature and initiate biodegradation. Thus, besides moisture, temperature may be the next important factor controlling the biological decomposition in anaerobic bioreactor landfills. Spatial and temporal characterization of leachate samples indicated the presence of low levels of commonly used volatile organic compounds (including acetone, methyl ethyl ketone, methyl isobutyl ketone, and toluene) and metals (including arsenic, chromium, and zinc). Changes and leachate and gaseous sample characteristics correlated with enhanced biological activity and increase in temperature. Continued monitoring of this bioreactor landfill cell is expected to yield critical data needed for start up, design, and operation of this emerging process.« less

  • ;
    Twenty-one states and the District of Columbia have adopted mandatory renewables portfolio standards (RPS) over the last ten years. Renewable energy attributes-such as the energy source, conversion technology, plant location and vintage, and emissions-are usually required to verify compliance with these policies, sometimes through attributes bundled with electricity, and sometimes with the attributes unbundled from electricity and traded separately as renewable energy certificates (RECs). This report summarizes the treatment of renewable energy attributes in state RPS rules. Its purpose is to provide a source of information for states considering RPS policies, and also to draw attention to certain policy issuesmore » that arise when renewable attributes and RECs are used for RPS compliance. Three specific issues are addressed: (1) the degree to which unbundled RECs are allowed under existing state RPS programs and the status of systems to track RECs and renewable energy attributes; (2) definitions of the renewable energy attributes that must be included in order to meet state RPS obligations, including the treatment of available emissions allowances; and (3) state policies on whether renewable energy or RECs sold through voluntary green power transactions may count towards RPS obligations.« less