Modeling Single Well Injection-Withdrawal (SWIW) Tests for Characterization of Complex Fracture-Matrix Systems
The ability to reliably predict flow and transport in fractured porous rock is an essential condition for performance evaluation of geologic (underground) nuclear waste repositories. In this report, a suite of programs (TRIPOLY code) for calculating and analyzing flow and transport in two-dimensional fracture-matrix systems is used to model single-well injection-withdrawal (SWIW) tracer tests. The SWIW test, a tracer test using one well, is proposed as a useful means of collecting data for site characterization, as well as estimating parameters relevant to tracer diffusion and sorption. After some specific code adaptations, we numerically generated a complex fracture-matrix system for computation of steady-state flow and tracer advection and dispersion in the fracture network, along with solute exchange processes between the fractures and the porous matrix. We then conducted simulations for a hypothetical but workable SWIW test design and completed parameter sensitivity studies on three physical parameters of the rock matrix - namely porosity, diffusion coefficient, and retardation coefficient - in order to investigate their impact on the fracture-matrix solute exchange process. Hydraulic fracturing, or hydrofracking, is also modeled in this study, in two different ways: (1) by increasing the hydraulic aperture for flow in existing fractures and (2) by adding a new set of fractures to the field. The results of all these different tests are analyzed by studying the population of matrix blocks, the tracer spatial distribution, and the breakthrough curves (BTCs) obtained, while performing mass-balance checks and being careful to avoid some numerical mistakes that could occur. This study clearly demonstrates the importance of matrix effects in the solute transport process, with the sensitivity studies illustrating the increased importance of the matrix in providing a retardation mechanism for radionuclides as matrix porosity, diffusion coefficient, or retardation coefficient increase. Interestingly, model results before and after hydrofracking are insensitive to adding more fractures, while slightly more sensitive to aperture increase, making SWIW tests a possible means of discriminating between these two potential hydrofracking effects. Finally, we investigate the possibility of inferring relevant information regarding the fracture-matrix system physical parameters from the BTCs obtained during SWIW testing.
- Research Organization:
- Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- Earth Sciences Division
- DOE Contract Number:
- DE-AC02-05CH11231
- OSTI ID:
- 1048281
- Report Number(s):
- LBNL-4937E; TRN: US1204253
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of RWHet to Simulate Contaminant Transport in Fractured Porous Media
Scale-Dependent Fracture-Matrix Interactions And Their Impact on Radionuclide Transport - Final Report
Related Subjects
54 ENVIRONMENTAL SCIENCES
58 GEOSCIENCES
ADVECTION
APERTURES
DESIGN
DIFFUSION
FRACTURES
HYDRAULIC FRACTURING
HYDRAULICS
MASS BALANCE
POROSITY
RADIOACTIVE WASTES
RADIOISOTOPES
SENSITIVITY
SITE CHARACTERIZATION
SOLUTES
SORPTION
SPATIAL DISTRIBUTION
TESTING