Recent Progress of the Series-Connected Hybrid Magnet Projects
- Florida State University
The National High Magnetic Field Laboratory (NHMFL) in Tallahassee, Florida has designed and is now constructing two Series Connected Hybrid (SCH) magnets, each connecting a superconducting outsert coil and a resistive Florida Bitter insert coil electrically in series. The SCH to be installed at the NHMFL will produce 36 T and provide 1 ppm maximum field inhomogeneity over a 1 cm diameter spherical volume. The SCH to be installed at the Helmholtz Center Berlin (HZB) in combination with a neutron source will produce 25 T to 30 T depending on the resistive insert. The two magnets have a common design for their cable-in-conduit conductor (CICC) and superconducting outsert coils. The CICC outsert coil winding packs have an inner diameter of 0.6 m and contribute 13.1 T to the central field using three grades of CICC conductors. Each conductor grade carries 20 kA and employs the same type of Nb{sub 3}Sn superconducting wire, but each grade contains different quantities of superconducting wires, different cabling patterns and different aspect ratios. The cryostats and resistive insert coils for the two magnets are different. This paper discusses the progress in CIC conductor and coil fabrication over the last year including specification, qualification and production activities for wire, cable, conductor and coil processing.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- ORNL other overhead
- DOE Contract Number:
- DE-AC05-00OR22725
- OSTI ID:
- 1045245
- Journal Information:
- IEEE Transactions on Applied Superconductivity, Vol. 20, Issue 3; ISSN 1051-8223
- Country of Publication:
- United States
- Language:
- English
Similar Records
The potential for SAGBO cracking in a Nb{sub 3}Sn wind-and-react solenoid using a CICC with Incoloy 908 jacket and glass fabric insulation
Progress on the NHMFL 45-T hybrid magnet system