skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Control Dewar and VLPC Bayonet Can Platform Connection Design and Analysis

Abstract

The four connections for the control dewar and VLPC bayonet can platform are designed, using finite element analysis, to carry all dead weight and live loads. Based on the loads applied to the platform, two 1 inch thick plates and two 3/4 inch thick brackets made of ASTM A572-Grade 42 are required. The 1 inch thick plate requires a 3/8 inch thick intermediate steel material, between the 8-inch x 4-inch x 1/4-inch boom and the plate, for load reinforcement as well as weld area reinforcement. Both the plates and the brackets require 3/4 inch steel bolt connections.

Authors:
Publication Date:
Research Org.:
Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
1032129
Report Number(s):
FERMILAB-D0-EN-467
TRN: US1200494
DOE Contract Number:  
AC02-07CH11359
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; DESIGN; DEWARS; FASTENERS; PLATES; STEELS; Experiment-HEP

Citation Formats

Kuwazaki, A., and /Fermilab. Control Dewar and VLPC Bayonet Can Platform Connection Design and Analysis. United States: N. p., 1997. Web. doi:10.2172/1032129.
Kuwazaki, A., & /Fermilab. Control Dewar and VLPC Bayonet Can Platform Connection Design and Analysis. United States. doi:10.2172/1032129.
Kuwazaki, A., and /Fermilab. Tue . "Control Dewar and VLPC Bayonet Can Platform Connection Design and Analysis". United States. doi:10.2172/1032129. https://www.osti.gov/servlets/purl/1032129.
@article{osti_1032129,
title = {Control Dewar and VLPC Bayonet Can Platform Connection Design and Analysis},
author = {Kuwazaki, A. and /Fermilab},
abstractNote = {The four connections for the control dewar and VLPC bayonet can platform are designed, using finite element analysis, to carry all dead weight and live loads. Based on the loads applied to the platform, two 1 inch thick plates and two 3/4 inch thick brackets made of ASTM A572-Grade 42 are required. The 1 inch thick plate requires a 3/8 inch thick intermediate steel material, between the 8-inch x 4-inch x 1/4-inch boom and the plate, for load reinforcement as well as weld area reinforcement. Both the plates and the brackets require 3/4 inch steel bolt connections.},
doi = {10.2172/1032129},
journal = {},
number = ,
volume = ,
place = {United States},
year = {1997},
month = {7}
}