skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: D0 Cryogenic System Superconducting Solenoid Platform I/O

Abstract

The Dzero detector is scheduled for a major upgrade between 1996 and 1999. This note describes the specifications and configuration of the physical Input/Output devices and instrumentation of the 2 Tesla Superconducting Solenoid. The Solenoid and the VLPC cryostats both reside on the detector platform and are cooled by the Dzero Helium Refrigerator. The cryogenic process control s for these two components will be an extension of the TI565 programmable logic controller system used for other Dzero cryogenic controls. Two Input/Output Bases will be installed on the Dzero detector platform near the cryo corner. These I/O bases will handle all the sensor input and process control output devices from the Solenoid and VLPC cryostats. Having the I/O bases installed on the detector platform makes the connecting cabl ing to the platform much easier . All the instruments are wired directly to the I/O base. The bases have only one communications network cabl e that must be routed off the platform to the South side of the Dzero building.

Authors:
Publication Date:
Research Org.:
Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
1032124
Report Number(s):
FERMILAB-D0-EN-474
TRN: US1200489
DOE Contract Number:  
AC02-07CH11359
Resource Type:
Technical Report
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; COMMUNICATIONS; CONFIGURATION; CRYOGENICS; CRYOSTATS; FERMILAB TEVATRON; HELIUM; PROCESS CONTROL; SENSORS; SOLENOIDS; SPECIFICATIONS; SUPERCONDUCTING MAGNETS; Experiment-HEP

Citation Formats

Markley, D., and /Fermilab. D0 Cryogenic System Superconducting Solenoid Platform I/O. United States: N. p., 1997. Web. doi:10.2172/1032124.
Markley, D., & /Fermilab. D0 Cryogenic System Superconducting Solenoid Platform I/O. United States. doi:10.2172/1032124.
Markley, D., and /Fermilab. Thu . "D0 Cryogenic System Superconducting Solenoid Platform I/O". United States. doi:10.2172/1032124. https://www.osti.gov/servlets/purl/1032124.
@article{osti_1032124,
title = {D0 Cryogenic System Superconducting Solenoid Platform I/O},
author = {Markley, D. and /Fermilab},
abstractNote = {The Dzero detector is scheduled for a major upgrade between 1996 and 1999. This note describes the specifications and configuration of the physical Input/Output devices and instrumentation of the 2 Tesla Superconducting Solenoid. The Solenoid and the VLPC cryostats both reside on the detector platform and are cooled by the Dzero Helium Refrigerator. The cryogenic process control s for these two components will be an extension of the TI565 programmable logic controller system used for other Dzero cryogenic controls. Two Input/Output Bases will be installed on the Dzero detector platform near the cryo corner. These I/O bases will handle all the sensor input and process control output devices from the Solenoid and VLPC cryostats. Having the I/O bases installed on the detector platform makes the connecting cabl ing to the platform much easier . All the instruments are wired directly to the I/O base. The bases have only one communications network cabl e that must be routed off the platform to the South side of the Dzero building.},
doi = {10.2172/1032124},
journal = {},
number = ,
volume = ,
place = {United States},
year = {1997},
month = {10}
}