Design of Production Test IP-262-A-11-FP -- Evaluation of projection fuel elements for use in ribbed process tubes -- Demonstration loading
For several years, a major category of fuel element failures has been the side corrosion type, characterized by localized accelerated fuel element jacket corrosion. Since it has been demonstrated {sup 1} that misalignment of fuel elements in a process tube will produce flow patterns and accelerated corrosion, termed ``hot spots``, failure to align the fuel elements in process tubes is considered a contributing factor in the production of side corrosion failures. Preliminary testing of both self-supporting and ``bumper`` fuel elements is underway. Data on the self-supporting fuel elements have demonstrated that the bridge-rail projections have sufficient support strength, do not of themselves create a corrosion problem and in actuality probably eliminate any hot-spot areas. Although one tube of bumper fuel elements in KW Reactor {sup 3} has been discharged, data are not as yet available. Potentially, the most sever corrosion conditions exist during the summer months when reactor inlet temperatures are high. It is desirable then, provided bumper fuel elements limit hot- spot corrosion, to evaluate the bumper concept for large scale use possibly by the summer of 1960. To accomplish this, a demonstration loading of the bumper type fuel elements must be underway by about July, 1959. The purpose of this report is to present the design of a test to evaluate the fabrication process and irradiation performance of fuel elements having projections, which may prevent misalignment in ribbed process tubes and meet the aforementioned goals.
- Research Organization:
- General Electric Co., Richland, WA (United States). Hanford Atomic Products Operation
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC06-76RL01830
- OSTI ID:
- 10137957
- Report Number(s):
- HW-60444-A; ON: DE93010225
- Resource Relation:
- Other Information: PBD: 29 Jun 1959
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of supplement A to production test IP-183-A-98-FP evaluation of projection fuel elements in K process tubes
Production test IP-262-A-11-FP, evaluation of projection fuel elements for use in ribbed process tubes: Demonstration loadings