Three dimensional field calculations for a Short Superconducting Dipole for the UCLA Ultra Compact Synchrotron
The Ultra Compact Synchrotron (UCS), proposed for UCLA, is a compact 1.5 GeV electron light source with superconducting magnets to produce X rays with a critical energy of about 10 keV. The design physical length (cold length) for the dipole is 418 mm. The synchrotron requires that a uniform field be produced in a region that is 180 mm wide by 40 mm high by about 380 mm long. The end regions of the dipole should be short compared to the overall length of the dipole field region. A Vobly H type of dipole was selected for the synchrotron bending magnets. In order for each dipole to bend a 1.5 GeV electron beam 30 degrees, the central induction must be in the range of 6.4 to 6.9 T (depending on the dipole magnetic length). The pole width for the dipole was set so that over 90% of the X rays generated by the magnet can be extracted. The three dimensional field calculations were done using TOSCA. This report shows that a Vobly type of dipole will behave magnetically as a conventional water cooled iron dominated dipole. The uniformity of the integrated magnetic field can be controlled by varying the current in the shield coil with respect to the gap and cross-over coils. The two dimensional field in the center of the magnet can be tuned to be very uniform over a width of 110 to 120 mm. The three dimensional calculations show that the magnetic length along a particle track in the dipole is about 29 mm longer than the length of the iron pole pieces. This report will present the three dimensional design of the UCS Vobly dipole and the results of the field calculations for that magnet.
- Research Organization:
- Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- Accelerator& Fusion Research Division
- DOE Contract Number:
- DE-AC02-05CH11231
- OSTI ID:
- 1011367
- Report Number(s):
- LBNL-42169; TRN: US201109%%291
- Resource Relation:
- Conference: Applied Superconductivity Conference, Palm Desert, CA, 9/13-18/1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design parameters for a 7.2 tesla bending magnet for a 1.5 GeV compact light source
A superconducting bending magnet system for a compact synchrotron light source