skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Surface impurity removal from DIII-D graphite tiles by boron carbide grit blasting

Conference ·
OSTI ID:10108484

During the latter half of 1992, the DIII-D tokamak at General Atomics (GA) underwent several modifications of its interior. One of the major tasks involved the removal of accumulated metallic impurities from the surface of the graphite tiles used to line the plasma facing surfaces inside of the tokamak. Approximately 1500 graphite tiles and 100 boron nitride tiles from the tokamak were cleaned to remove the metallic impurities. The cleaning process consisted of several steps: the removed graphite tiles were permanently marked, surface blasted using boron carbide (B{sub 4}C) grit media (approximately 37 {mu}m. diam.), ultrasonically cleaned in ethanol to remove loose dust, and outgassed at 1000{degrees}C. Tests were done using, graphite samples and different grit blaster settings to determine the optimum propellant and abrasive media pressures to remove a graphite layer approximately 40-50 {mu}m deep and yet produce a reasonably smooth finish. EDX measurements revealed that the blasting technique reduced the surface Ni, Cr, and Fe impurity levels to those of virgin graphite. In addition to the surface impurity removal, tritium monitoring was performed throughout the cleaning process. A bubbler system was set up to monitor the tritium level in the exhaust gas from the grit blaster unit. Surface wipes were also performed on over 10% of the tiles. Typical surface tritium concentrations of the tiles were reduced from about 500 dpm/100 cm{sup 2} to less than 80 dpm/100 cm{sup 2} following the cleaning. This tile conditioning, and the installation of additional graphite tiles to cover a high fraction of the metallic plasma facing surfaces, has substantially reduced metallic impurities in the plasma discharges which has allowed rapid recovery from a seven-month machine opening and regimes of enhanced plasma energy confinement to be more readily obtained. Safety issues concerning blaster operator exposure to carcinogenic metals and radioactive tritium will also be addressed.

Research Organization:
General Atomics, San Diego, CA (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
AC03-89ER51114
OSTI ID:
10108484
Report Number(s):
GA-A-21426; CONF-931018-71; ON: DE94004188; TRN: 94:000914
Resource Relation:
Conference: Symposium on fusion engineering,Hyannis, MA (United States),11-15 Oct 1993; Other Information: PBD: Nov 1993
Country of Publication:
United States
Language:
English

Similar Records

Upgrade of the DIII-D vacuum vessel protection system
Conference · Fri Oct 01 00:00:00 EDT 1993 · OSTI ID:10108484

Operation of DIII-D with all-graphite walls
Conference · Fri Oct 01 00:00:00 EDT 1993 · OSTI ID:10108484

Operation of DIII-D with all-graphite walls
Journal Article · Fri Jul 01 00:00:00 EDT 1994 · Journal of Vacuum Science and Technology, A (Vacuum, Surfaces and Films); (United States) · OSTI ID:10108484