skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface

Abstract

Glassy polymeric carbon (GPC) is a useful material for medical applications due to its chemical inertness and biocompatible characteristics. Mitral and aortic and hydrocephalic valves are examples of GPC prosthetic devices that have been fabricated and commercialized in Brazil. In this work, ion beam was used to improve the mechanical characteristics of GPC surface and therefore to avoid the propagation of microcracks where the cardiac valves are more fragile. A control group of phenolic resin samples heat-treated at 300, 400, 700, 1000, 1500, and 2500 C was characterized by measuring their hardness and Young's reduced elastic modulus with the depth of indentation. The control group was compared to results obtained with samples heat-treated at 700, 1000, and 1500 C and bombarded with energetic ions of silicon, carbon, oxygen, and gold at energies of 5, 6, 8, and 10 MeV, respectively, with fluences between 1.0 x 10{sup 13} and 1.0 x 10{sup 16} ions/cm{sup 2}. GPC nonbombarded samples showed that hardness depends on the heat treatment temperature (HTT), with a maximum hardness for heat treatment at 1000 C. The comparison between the control group and bombarded group also showed that hardness, after bombardment, had a greater increase for samples prepared atmore » 700 C than for samples prepared at higher temperatures. The Young's elastic modulus presents an exponential relationship with depth. The parameters obtained by fitting depend on the HTT and on the ion used in the bombardment more than on energy and fluence. The hardness results show clearly that bombardment can promote carbonization, increase the linkage between the chains of the polymeric material, and promote recombination of broken bonds in lateral groups that are more numerous for samples heat-treated at 700 C.« less

Authors:
 [1];  [2];  [2];  [3];  [3];  [4];  [4]
  1. FFCLRP-USP, Ribeirao Preto, SP, Brazil
  2. UNESP, Guaratingueta, SP, Brazil
  3. Alabama A&M University, Normal
  4. ORNL
Publication Date:
Research Org.:
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
Sponsoring Org.:
USDOE Office of Science (SC)
OSTI Identifier:
1003382
DOE Contract Number:  
DE-AC05-00OR22725
Resource Type:
Journal Article
Journal Name:
Surface and Coatings Technology
Additional Journal Information:
Journal Volume: 196; Journal Issue: 1-3; Journal ID: ISSN 0257-8972
Country of Publication:
United States
Language:
English
Subject:
74 ATOMIC AND MOLECULAR PHYSICS; BRAZIL; CARBON; CARBONIZATION; CHAINS; GOLD; HARDNESS; HEAT TREATMENTS; ION BEAMS; MODIFICATIONS; OXYGEN; RECOMBINATION; RESINS; SILICON; TAIL IONS; VALVES

Citation Formats

Rodrigues, M. G., Da Cruz, N. C., Rangel, E. C., Zimmerman, R. L., Ila, Dr. Daryush, Poker, David B, and Hensley, Dale K. Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface. United States: N. p., 2005. Web. doi:10.1016/j.surfcoat.2004.08.094.
Rodrigues, M. G., Da Cruz, N. C., Rangel, E. C., Zimmerman, R. L., Ila, Dr. Daryush, Poker, David B, & Hensley, Dale K. Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface. United States. https://doi.org/10.1016/j.surfcoat.2004.08.094
Rodrigues, M. G., Da Cruz, N. C., Rangel, E. C., Zimmerman, R. L., Ila, Dr. Daryush, Poker, David B, and Hensley, Dale K. 2005. "Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface". United States. https://doi.org/10.1016/j.surfcoat.2004.08.094.
@article{osti_1003382,
title = {Effects of Ion Beam on Nanoindentation Characteristics of Glassy Polymeric Carbon Surface},
author = {Rodrigues, M. G. and Da Cruz, N. C. and Rangel, E. C. and Zimmerman, R. L. and Ila, Dr. Daryush and Poker, David B and Hensley, Dale K},
abstractNote = {Glassy polymeric carbon (GPC) is a useful material for medical applications due to its chemical inertness and biocompatible characteristics. Mitral and aortic and hydrocephalic valves are examples of GPC prosthetic devices that have been fabricated and commercialized in Brazil. In this work, ion beam was used to improve the mechanical characteristics of GPC surface and therefore to avoid the propagation of microcracks where the cardiac valves are more fragile. A control group of phenolic resin samples heat-treated at 300, 400, 700, 1000, 1500, and 2500 C was characterized by measuring their hardness and Young's reduced elastic modulus with the depth of indentation. The control group was compared to results obtained with samples heat-treated at 700, 1000, and 1500 C and bombarded with energetic ions of silicon, carbon, oxygen, and gold at energies of 5, 6, 8, and 10 MeV, respectively, with fluences between 1.0 x 10{sup 13} and 1.0 x 10{sup 16} ions/cm{sup 2}. GPC nonbombarded samples showed that hardness depends on the heat treatment temperature (HTT), with a maximum hardness for heat treatment at 1000 C. The comparison between the control group and bombarded group also showed that hardness, after bombardment, had a greater increase for samples prepared at 700 C than for samples prepared at higher temperatures. The Young's elastic modulus presents an exponential relationship with depth. The parameters obtained by fitting depend on the HTT and on the ion used in the bombardment more than on energy and fluence. The hardness results show clearly that bombardment can promote carbonization, increase the linkage between the chains of the polymeric material, and promote recombination of broken bonds in lateral groups that are more numerous for samples heat-treated at 700 C.},
doi = {10.1016/j.surfcoat.2004.08.094},
url = {https://www.osti.gov/biblio/1003382}, journal = {Surface and Coatings Technology},
issn = {0257-8972},
number = 1-3,
volume = 196,
place = {United States},
year = {Sat Jan 01 00:00:00 EST 2005},
month = {Sat Jan 01 00:00:00 EST 2005}
}