Stressed glass technology for actuators and removable barrier applications.
There are commercial and military applications in which a material needs to serve as a barrier that must subsequently be removed. In many cases it is desirable that once the barrier has served its function that it then be reduced to small pieces. For example, in pipelines and in downhole drilling applications, valves are needed to function as barriers that can sustain high pressures. Later the valves must be removed and essentially disappear or be rendered to such a small size that they do not interfere with the functioning of other equipment. Military applications include covers on missile silos or launch vehicles. Other applications might require that a component be used once as an actuator or for passive energy storage, and then be irreversibly removed, again so as not to interfere with the function or motion of other parts of the device. Brittle materials, especially those that are very strong, or are pre-stressed, are ideal candidates for these applications. Stressed glass can be produced in different sizes and shapes and the level of strength and pre-stress, both of which control the fragmentation, can be manipulated by varying the processing. Stressed glass can be engineered to fracture predictably at a specific stress level. Controlling the central tension allows the fragment size to be specified. The energy that is stored in the residual stress profile that results from ion exchange or thermal tempering processes can be harnessed to drive fragmentation of the component once it has been deliberately fractured. Energy can also be stored in the glass by mechanical loading. Energy from both of these sources can be released either to perform useful work or to initiate another reaction. Once the stressed glass has been used as a barrier or actuator it can never be ''used'' again because it fragments into many small unrecognizable pieces during the actuation. Under some circumstances it will interfere with the motion or functioning of other parts of a device. Our approach was to use stressed glass to develop capabilities for making components that can be used as barriers, as actuating devices that passively store energy, or as a mechanical weaklink that is destroyed by some critical shock or crush load. The objective of this project was to develop one or more prototype devices using stressed glass technology and demonstrate their potential for applications of interest. This work is intended to provide critical information and technologies for Sandia's NP&A and MT&A customers, and is relevant to commercial applications for these same materials. Most of the studies in this project were conducted using the Corning 0317 sodium aluminosilicate glass composition.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 920791
- Report Number(s):
- SAND2007-4106; TRN: US200803%%27
- Country of Publication:
- United States
- Language:
- English
Similar Records
Measurement of wall and interfacial friction factors for counter-current flow in porous bed
Survey of four damage models for concrete.