skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: ACRR (Annular Core Research Reactor) fission product release tests: ST-1 and ST-2

Conference ·
OSTI ID:7051827

Two experiments (ST-1 and ST-2) have been performed in the Annular Core Research Reactor (ACER) at Sandia National Laboratories (SNLA) to obtain time-resolved data on the release of fission products from irradiated fuels under light water reactor (LWR) severe accident conditions. Both experiments were conducted in a highly reducing environment at maximum fuel temperatures of greater than 2400 K. These experiments were designed specifically to investigate the effect of increased total pressure on fission product release; ST-1 was performed at approximately 0.16 MPa and ST-2 was run at 1.9 MPa, whereas other parameters were matched as closely as possible. Release rate data were measured for Cs, I, Ba, Sr, Eu, Te, and U. The release rates were higher than predicted by existing codes for Ba, Sr, Eu, and U. Te release was very low, but Te did not appear to be sequestered by the zircaloy cladding; it was evenly distributed in the fuel. In addition, in posttest analysis a unique fuel morphology (fuel swelling) was observed which may have enhanced fission product release, especially in the high pressure test (ST-2). These data are compared with analytical results from the CORSOR correlation and the VICTORIA computer model. 8 refs., 8 figs., 2 tabs.

Research Organization:
Sandia National Labs., Albuquerque, NM (USA)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
7051827
Report Number(s):
SAND-88-0597C; CONF-881014-9; ON: DE88015694; TRN: 88-035658
Resource Relation:
Conference: International European Nuclear Society/American Nuclear Society meeting on thermal reactor safety, Avignon, France, 2 Oct 1988; Other Information: Portions of this document are illegible in microfiche products
Country of Publication:
United States
Language:
English