Bunch identification module
This module provides bunch identification and timing signals for the PEP Interaction areas. Timing information is referenced to the PEP master oscillator, and adjusted in phase as a function of region. Identification signals are generated in a manner that allows observers in all interaction regions to agree on an unambiguous bunch identity. The module provides bunch identification signals via NIM level logic, upon CAMAC command, and through LED indicators. A front panel ''region select'' switch allows the same module to be used in all regions. The module has two modes of operation: a bunch identification mode and a calibration mode. In the identification mode, signals indicate which of the three bunches of electrons and positrons are interacting, and timing information about beam crossing is provided. The calibration mode is provided to assist experimenters making time of flight measurements. In the calibration mode, three distinct gating signals are referenced to a selected bunch, allowing three timing systems to be calibrated against a common standard. Physically, the bunch identifier is constructed as a single width CAMAC module. 2 figs., 1 tab.
- Research Organization:
- SLAC National Accelerator Lab., Menlo Park, CA (United States)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 6521546
- Report Number(s):
- SLAC-PEP-NOTE-344-Rev.; ON: DE89006266
- Resource Relation:
- Other Information: Portions of this document are illegible in microfiche products
- Country of Publication:
- United States
- Language:
- English
Similar Records
A Two Bunch Beam Position Monitor
The National Response Plan and the Problems in the Evaluation and Assessment of the Unconventional Modes of Terrorism