Additional requirements for leak-before-break application to primary coolant piping in Belgium
- AIB Vincotte Nuclear, Brussels (Belgium)
Leak-Before-Break (LBB) technology has not been applied in the first design of the seven Pressurized Water Reactors the Belgian utility is currently operating. The design basis of these plants required to consider the dynamic effects associated with the ruptures to be postulated in the high energy piping. The application of the LBB technology to the existing plants has been recently approved by the Belgian Safety Authorities but with a limitation to the primary coolant loop. LBB analysis has been initiated for the Doel 3 and Tihange 2 plants to allow the withdrawal of some of the reactor coolant pump snubbers at both plants and not reinstall some of the restraints after steam generator replacement at Doel 3. LBB analysis was also found beneficial to demonstrate the acceptability of the primary components and piping to the new conditions resulting from power uprating and stretch-out operation. LBB analysis has been subsequently performed on the primary coolant loop of the Tihange I plant and is currently being performed for the Doel 4 plant. Application of the LBB to the primary coolant loop is based in Belgium on the U.S. Nuclear Regulatory Commission requirements. However the Belgian Safety Authorities required some additional analyses and put some restrictions on the benefits of the LBB analysis to maintain the global safety of the plant at a sufficient level. This paper develops the main steps of the safety evaluation performed by the Belgian Safety Authorities for accepting the application of the LBB technology to existing plants and summarizes the requirements asked for in addition to the U.S. Nuclear Regulatory Commission rules.
- Research Organization:
- US Nuclear Regulatory Commission (NRC), Washington, DC (United States). Div. of Engineering Technology; Electricite de France (EDF), 69 - Villeurbanne (France); Battelle Memorial Inst., Columbus, OH (United States)
- OSTI ID:
- 489292
- Report Number(s):
- NUREG/CP-0155; CONF-9510432-; ON: TI97004806; TRN: 97:011432
- Resource Relation:
- Conference: Seminar on leak before break in reactor piping and vessels, Lyon (France), 9-11 Oct 1995; Other Information: PBD: Apr 1997; Related Information: Is Part Of Proceedings of the seminar on leak before break in reactor piping and vessels; Faidy, C. [ed.] [Electricite de France, Villeurbanne (France)]; Gilles, P. [ed.] [Framatome, Paris (France)]; PB: 773 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
ORNL Evaluation of Electrabel Safety Cases for Doel 3 / Tihange 2: Final Report
Dismantling of the Spent Resins Hot Compaction Unit at Tihange NPP, Belgium - 19139