Development of a 402.5 MHz 140 kW Inductive Output Tube
This report contains the results of Phase I of an SBIR to develop a Pulsed Inductive Output Tube (IOT) with 140 kW at 400 MHz for powering H-proton beams. A number of sources, including single beam and multiple beam klystrons, can provide this power, but the IOT provides higher efficiency. Efficiencies exceeding 70% are routinely achieved. The gain is typically limited to approximately 24 dB; however, the availability of highly efficient, solid state drivers reduces the significance of this limitation, particularly at lower frequencies. This program initially focused on developing a 402 MHz IOT; however, the DOE requirement for this device was terminated during the program. The SBIR effort was refocused on improving the IOT design codes to more accurately simulate the time dependent behavior of the input cavity, electron gun, output cavity, and collector. Significant improvement was achieved in modeling capability and simulation accuracy.
- Research Organization:
- Calabazas Creek Research, Inc.
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- SC0004566
- OSTI ID:
- 1039691
- Report Number(s):
- Final Report; TRN: US1202824
- Country of Publication:
- United States
- Language:
- English
Similar Records
High-Efficiency Inductive Output Tubes Using a Third Harmonic Drive on the Grid
A 30 MW, 200 MHz Inductive Output Tube for RF Accelerators