Durable, Low-cost, Improved Fuel Cell Membranes
The development of low cost, durable membranes and membranes electrode assemblies (MEAs) that operate under reduced relative humidity (RH) conditions remain a critical challenge for the successful introduction of fuel cells into mass markets. It was the goal of the team lead by Arkema, Inc. to address these shortages. Thus, this project addresses the following technical barriers from the fuel cells section of the Hydrogen Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan: (A) Durability (B) Cost Arkema’s approach consisted of using blends of polyvinylidenefluoride (PVDF) and proprietary sulfonated polyelectrolytes. In the traditional approach to polyelectrolytes for proton exchange membranes (PEM), all the required properties are “packaged” in one macromolecule. The properties of interest include proton conductivity, mechanical properties, durability, and water/gas transport. This is the case, for example, for perfluorosulfonic acid-containing (PFSA) membranes. However, the cost of these materials is high, largely due to the complexity and the number of steps involved in their synthesis. In addition, they suffer other shortcomings such as mediocre mechanical properties and insufficient durability for some applications. The strength and originality of Arkema’s approach lies in the decoupling of ion conductivity from the other requirements. Kynar® PVDF provides an exceptional combination of properties that make it ideally suited for a membrane matrix (Kynar® is a registered trademark of Arkema Inc.). It exhibits outstanding chemical resistance in highly oxidative and acidic environments. In work with a prior grant, a membrane known as M41 was developed by Arkema. M41 had many of the properties needed for a high performance PEM, but had a significant deficiency in conductivity at low RH. In the first phase of this work, the processing parameters of M41 were explored as a means to increase its proton conductivity. Optimizing the processing of M41 was found to increase its proton conductivity by almost an order of magnitude at 50% RH. Characterization of the membrane morphology with Karren More at Oak Ridge National Laboratory showed that the membrane morphology was complex. This technology platform was dubbed M43 and was used as a baseline in the majority of the work on the project. Although its performance was superior to M41, M43 still showed proton conductivity an order of magnitude lower than that of a PFSA membrane at 50% RH. The MEA performance of M43 could be increased by reducing the thickness from 1 to 0.6 mils. However, the performance of the thinner M43 still did not match that of a PFSA membrane.
- Research Organization:
- Arkema Inc.
- Sponsoring Organization:
- USDOE EE Office of Fuel Cell Technologies (EE-2H)
- DOE Contract Number:
- FG36-07GO17008
- OSTI ID:
- 1018315
- Report Number(s):
- DOE17008; TRN: US201114%%130
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low-Cost Proton Conducting Membranes for PEM Fuel Cells
Novel Hydrocarbon Ionomers for Durable Proton Exchange Membranes
Related Subjects
DECOUPLING
ELECTRODES
FUEL CELLS
HUMIDITY
HYDROGEN FUEL CELLS
MECHANICAL PROPERTIES
MEMBRANES
MORPHOLOGY
ORNL
PERFORMANCE
PROCESSING
PROTON CONDUCTIVITY
PROTONS
SHORTAGES
SYNTHESIS
THICKNESS
TRANSPORT
WATER GAS
Membranes
Fuel Cell
Hydrogen Fuel Cell
Polyelectrolytes
Proton Exchange Membranes