skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A design for a combined function superconducting dipole for a muon collider FFAG accelerator

Abstract

The acceleration stages for a muon collider require that the muons be accelerated within a given ring in fewer than twenty turns. One type of accelerator that appears to be attractive for a synchrotron that accelerates the muon a factor of four in energy in a few turns is the Fixed Field Alternating Gradient (FFAG) type of accelerator. As the energy of the muon beam increases, the muons move toward a higher field region of a DC combined function dipole. The following dipole and quadrupole magnet characteristics are required for a muon FFAG machine to be successful: (1) The dipole will be a fixed field dipole with an impressed quadrupole and sextupole field. There may or may not be separate quadrupoles that mayor may not have added sextupole windings. (2) The horizontal aperture of the required good field region is wider than the vertical aperture of the required good field region. (3) The magnet is relatively short, so that the conventional SSC type of superconducting dipole or quadrupole ends can not be used. The field at the end of the magnet must fall off abruptly within the distance of less than one vertical aperture. For a magnet that is 400more » mm long, the end region can be no more than 80 mm long. (4) The structure of the integrated field within the end region must be the same as the structure of the two-dimensional filed at the center of the magnet. A very preliminary design concept for a FFAG combined function dipole is presented in this paper.« less

Authors:
Publication Date:
Research Org.:
Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
Sponsoring Org.:
Engineering Division
OSTI Identifier:
1011502
Report Number(s):
LBNL-44190
TRN: US201109%%467
DOE Contract Number:  
DE-AC02-05CH11231
Resource Type:
Conference
Resource Relation:
Conference: Fourth European Conference on Applied Superconductivity, Sitges, Spain, September 14 - 17, 1999
Country of Publication:
United States
Language:
English
Subject:
42; 43; ACCELERATION; ACCELERATORS; APERTURES; DESIGN; DIPOLES; MAGNETS; MUON BEAMS; MUONS; QUADRUPOLES; SUPERCONDUCTING SUPER COLLIDER; SUPERCONDUCTIVITY; SYNCHROTRONS

Citation Formats

Green, M A. A design for a combined function superconducting dipole for a muon collider FFAG accelerator. United States: N. p., 1999. Web.
Green, M A. A design for a combined function superconducting dipole for a muon collider FFAG accelerator. United States.
Green, M A. 1999. "A design for a combined function superconducting dipole for a muon collider FFAG accelerator". United States. https://www.osti.gov/servlets/purl/1011502.
@article{osti_1011502,
title = {A design for a combined function superconducting dipole for a muon collider FFAG accelerator},
author = {Green, M A},
abstractNote = {The acceleration stages for a muon collider require that the muons be accelerated within a given ring in fewer than twenty turns. One type of accelerator that appears to be attractive for a synchrotron that accelerates the muon a factor of four in energy in a few turns is the Fixed Field Alternating Gradient (FFAG) type of accelerator. As the energy of the muon beam increases, the muons move toward a higher field region of a DC combined function dipole. The following dipole and quadrupole magnet characteristics are required for a muon FFAG machine to be successful: (1) The dipole will be a fixed field dipole with an impressed quadrupole and sextupole field. There may or may not be separate quadrupoles that mayor may not have added sextupole windings. (2) The horizontal aperture of the required good field region is wider than the vertical aperture of the required good field region. (3) The magnet is relatively short, so that the conventional SSC type of superconducting dipole or quadrupole ends can not be used. The field at the end of the magnet must fall off abruptly within the distance of less than one vertical aperture. For a magnet that is 400 mm long, the end region can be no more than 80 mm long. (4) The structure of the integrated field within the end region must be the same as the structure of the two-dimensional filed at the center of the magnet. A very preliminary design concept for a FFAG combined function dipole is presented in this paper.},
doi = {},
url = {https://www.osti.gov/biblio/1011502}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Fri Sep 10 00:00:00 EDT 1999},
month = {Fri Sep 10 00:00:00 EDT 1999}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: