Ice Thermal Storage Systems for LWR Supplemental Cooling and Peak Power Shifting
Availability of enough cooling water has been one of the major issues for the nuclear power plant site selection. Cooling water issues have frequently disrupted the normal operation at some nuclear power plants during heat waves and long draught. The issues become more severe due to the new round of nuclear power expansion and global warming. During hot summer days, cooling water leaving a power plant may become too hot to threaten aquatic life so that environmental regulations may force the plant to reduce power output or even temporarily to be shutdown. For new nuclear power plants to be built at areas without enough cooling water, dry cooling can be used to remove waste heat directly into the atmosphere. However, dry cooling will result in much lower thermal efficiency when the weather is hot. One potential solution for the above mentioned issues is to use ice thermal storage systems (ITS) that reduce cooling water requirements and boost the plant’s thermal efficiency in hot hours. ITS uses cheap off-peak electricity to make ice and uses those ice for supplemental cooling during peak demand time. ITS is suitable for supplemental cooling storage due to its very high energy storage density. ITS also provides a way to shift large amount of electricity from off peak time to peak time. Some gas turbine plants already use ITS to increase thermal efficiency during peak hours in summer. ITSs have also been widely used for building cooling to save energy cost. Among three cooling methods for LWR applications: once-through, wet cooling tower, and dry cooling tower, once-through cooling plants near a large water body like an ocean or a large lake and wet cooling plants can maintain the designed turbine backpressure (or condensation temperature) during 99% of the time; therefore, adding ITS to those plants will not generate large benefits. For once-through cooling plants near a limited water body like a river or a small lake, adding ITS can bring significant economic benefits and avoid forced derating and shutdown during extremely hot weather. For the new plants using dry cooling towers, adding the ice thermal storage systems can effectively reduce the efficiency loss and water consumption during hot weather so that new LWRs could be considered in regions without enough cooling water. \ This paper presents the feasibility study of using ice thermal storage systems for LWR supplemental cooling and peak power shifting. LWR cooling issues and ITS application status will be reviewed. Two ITS application case studies will be presented and compared with alternative options: one for once-through cooling without enough cooling for short time, and the other with dry cooling. Because capital cost, especially the ice storage structure/building cost, is the major cost for ITS, two different cost estimation models are developed: one based on scaling method, and the other based on a preliminary design using Building Information Modeling (BIM), an emerging technology in Architecture/Engineering/Construction, which enables design options, performance analysis and cost estimating in the early design stage.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- DOE - NE
- DOE Contract Number:
- DE-AC07-05ID14517
- OSTI ID:
- 980800
- Report Number(s):
- INL/CON-09-17059; TRN: US1003805
- Resource Relation:
- Conference: 2010 International Congress on Advances in Nuclear Power Plants (ICAPP ’10),San Diego, CA,06/13/2010,06/17/2010
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improvement of Coal Power Plant Dry Cooling Technology through Application of Cold Thermal Energy Storage
Packed Bed thermal storage for compact Light water-cooled Small Modular Reactors
Related Subjects
CAPITALIZED COST
COOLING TOWERS
COST ESTIMATION
DESIGN
EFFICIENCY
ENERGY ACCOUNTING
ENERGY STORAGE
GAS TURBINES
GREENHOUSE EFFECT
HEAT STORAGE
NUCLEAR POWER
NUCLEAR POWER PLANTS
PEAK LOAD
POWER PLANTS
SITE SELECTION
STORAGE
THERMAL EFFICIENCY
WASTE HEAT
WATER REQUIREMENTS
WEATHER
ice thermal storage
LWR
thermal efficiency