Lead-bismuth eutectic as advanced reactor collant : operational experience
- Keith A.
- Valentina
- Ning
Some proposed advanced reactor concepts would be cooled by lead or lead-bismuth eutectic (LBE). An LBE test loop was designed and built at Los Alamos to develop the engineering and materials technology necessary to successfully implement LBE as a coolant (Fig. 1). Operational since December 2001, this test loop has been used to develop and demonstrate safe operation, oxygen concentration and metal corrosion control, instrumentation, thermal-hydraulic performance of heat exchangers and recuperators, and free convection and forced pumping. This paper discusses the technology development and lessons learned from the operation of this facility. A LBE test loop has been operational since December 2001. Using procedures, training, and engineering controls, this loop has operated without an accident. Continuous improvements in operation procedures and instrumentation over these years have resulted in a facility of high reliability, providing the groundwork for the use of LBE as a reactor coolant for temperatures up to 550 C.
- Research Organization:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 977676
- Report Number(s):
- LA-UR-04-3925; TRN: US1003630
- Resource Relation:
- Conference: Submitted to: ANS Meeting, Washington, DC, November 14, 2004
- Country of Publication:
- United States
- Language:
- English
Similar Records
Active control of oxygen in molten lead-bismuth eutectic systems to prevent steel corrosion and coolant contamination
Numerical Modeling of Lead Oxidation in Controlled Lead Bismuth Eutectic Systems: Chemical Kinetics and Hydrodynamic Effects