An Innovative High Thermal Conductivity Fuel Design
Thermal conductivity of the fuel in today's Light Water Reactors, Uranium dioxide, can be improved by incorporating a uniformly distributed heat conducting network of a higher conductivity material, Silicon Carbide. The higher thermal conductivity of SiC along with its other prominent reactor-grade properties makes it a potential material to address some of the related issues when used in UO2 [97% TD]. This ongoing research, in collaboration with the University of Florida, aims to investigate the feasibility and develop a formal methodology of producing the resultant composite oxide fuel. Calculations of effective thermal conductivity of the new fuel as a function of %SiC for certain percentages and as a function of temperature are presented as a preliminary approach. The effective thermal conductivities are obtained at different temperatures from 600K to 1600K. The corresponding polynomial equations for the temperature-dependent thermal conductivities are given based on the simulation results. Heat transfer mechanism in this fuel is explained using a finite volume approach and validated against existing empirical models. FLUENT 6.1.22 was used for thermal conductivity calculations and to estimate reduction in centerline temperatures achievable within such a fuel rod. Later, computer codes COMBINE-PC and VENTURE-PC were deployed to estimate the fuel enrichment required, to maintain the same burnup levels, corresponding to a volume percent addition of SiC.
- Research Organization:
- Univ. of South Carolina, Columbia, SC (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- FG07-04ID14597
- OSTI ID:
- 970984
- Report Number(s):
- DOE/ID/14597; TRN: US1001121
- Country of Publication:
- United States
- Language:
- English
Similar Records
The Optimum Plutonium Inert Matrix Fuel Form for Reactor-Based Plutonium Disposition
The Optimum Plutonium Inert Matrix Fuel Form for Reactor-Based Plutonium Disposition