skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Dust Studies in DIII-D and TEXTOR

Conference ·

Studies of naturally occurring and artificially introduced carbon dust are conducted in DIII-D and TEXTOR. In DIII-D, dust does not present operational concerns except immediately after entry vents. Submicron sized dust is routinely observed using Mie scattering from a Nd:Yag laser. The source is strongly correlated with the presence of Type I edge localized modes (ELMs). Larger size (0.005-1 mm diameter) dust is observed by optical imaging, showing elevated dust levels after entry vents. Inverse dependence of the dust velocity on the inferred dust size is found from the imaging data. Direct heating of the dust particles by the neutral beam injection (NBI) and acceleration of dust particles by the plasma flows are observed. Energetic plasma disruptions produce significant amounts of dust. Large flakes or debris falling into the plasma may result in a disruption. Migration of pre-characterized carbon dust is studied in DIII-D and TEXTOR by introducing micron-size dust in plasma discharges. In DIII-D, a sample holder filled with {approx}30 mg of dust is introduced in the lower divertor and exposed to high-power ELMing H-mode discharges with strike points swept across the divertor floor. After a brief exposure ({approx}0.1 s) at the outer strike point, part of the dust is injected into the plasma, raising the core carbon density by a factor of 2-3 and resulting in a twofold increase of the radiated power. In TEXTOR, instrumented dust holders with 1-45 mg of dust are exposed in the scrape-off layer 0-2 cm radially outside of the last closed flux surface in discharges heated with neutral beam injection (NBI) power of 1.4 MW. At the given configuration of the launch, the dust did not penetrate the core plasma and only moderately perturbed the edge plasma, as evidenced by an increase of the edge carbon content.

Research Organization:
Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
W-7405-ENG-48
OSTI ID:
966891
Report Number(s):
LLNL-PROC-410679; TRN: US0904152
Resource Relation:
Journal Volume: 49; Journal Issue: 8; Conference: Presented at: 22nd IAEA Fusion Energy Conference, Geneva, Switzerland, Oct 13 - Oct 18, 2009
Country of Publication:
United States
Language:
English

References (17)

Spatial distribution of limiter material and impurities on the first wall of TFR 400 journal September 1978
Plasma-material interactions in current tokamaks and their implications for next step fusion reactors journal December 2001
Dust-particle transport in tokamak edge plasmas journal December 2005
Physics of dust in Magnetic Fusion Devices conference January 2012
Recent progress in understanding the behavior of dust in fusion devices journal November 2008
Analysis of radiative disruptions in RF-heated Tore Supra plasmas using infrared imaging journal June 2009
A design retrospective of the DIII-D tokamak journal May 2002
Measurement of number density and size distribution of dust in DIII-D during normal plasma operation journal October 2006
Laser-dust interaction and dust size distribution measurements on DIII-D journal November 2007
Correlation of submicron dust observed in DIII-D during plasma operation with plasma operating parameters journal June 2007
Correlation of submicron dust production in DIII-D to impulsive wall heating from ELMs journal June 2009
The Filterscope journal March 2003
Design and operation of the multipulse Thomson scattering diagnostic on DIII‐D (invited) journal October 1992
Modelling of dynamics and transport of carbon dust particles in tokamaks journal February 2007
Fast camera imaging of dust in the DIII-D tokamak journal June 2009
Modeling of velocity distributions of dust in tokamak edge plasmas and dust–wall collisions journal June 2009
Improved charge-coupled device detectors for high-speed, charge exchange spectroscopy studies on the DIII-D tokamak journal October 2004