Analysis of design control values for TEP
- Los Alamos National Laboratory
The Tokamak Exhaust Processing (TEP) Performance Requirements Report (USITER-13201-TD0005-R00), date May 29, 2007 defined feed sources for TEP quantities and approximate flow rate of gases from these individual sources. In addition, the report identified the approximate periods of time (during Burn and Dwell, 'Silent Shift', etc.) that these gases would be transferred to TEP. This report did not take into account the detailed, time dependent, sequencing options for receiving gases from these feed sources. Sequencing is critical in defining the actual design basis values (flow rates, etc.) for TEP. This report analyzes the time dependent sequencing of feed flows to TEP and defines the ,design basis values. This analysis is based on the values presented in the TEP Performance Requirements Report (TEP PRR), and indicates that the ITER Burn and Dwell, Silent Shift Following 16 hours of Burn and Dwell, Glow Discharge Cleaning (GDC), and Silent Shift following 100 hours of GDC scenarios are the limiting scenarios from which the design basis values will be defined.
- Research Organization:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC52-06NA25396
- OSTI ID:
- 960912
- Report Number(s):
- LA-UR-08-06464; LA-UR-08-6464; TRN: US1002667
- Resource Relation:
- Conference: TPPT Meeting ; October 6, 2008 ; Cadarache, France
- Country of Publication:
- United States
- Language:
- English
Similar Records
System interfaces control document for the Tokamak exhaust processing system PBS 3.2.1
DIVISION OF REACTOR DEVELOPMENT PROGRAMS MONTHLY REPORT FOR MARCH 1959