Validation of thermal models for a prototypical MEMS thermal actuator.
This report documents technical work performed to complete the ASC Level 2 Milestone 2841: validation of thermal models for a prototypical MEMS thermal actuator. This effort requires completion of the following task: the comparison between calculated and measured temperature profiles of a heated stationary microbeam in air. Such heated microbeams are prototypical structures in virtually all electrically driven microscale thermal actuators. This task is divided into four major subtasks. (1) Perform validation experiments on prototypical heated stationary microbeams in which material properties such as thermal conductivity and electrical resistivity are measured if not known and temperature profiles along the beams are measured as a function of electrical power and gas pressure. (2) Develop a noncontinuum gas-phase heat-transfer model for typical MEMS situations including effects such as temperature discontinuities at gas-solid interfaces across which heat is flowing, and incorporate this model into the ASC FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (3) Develop a noncontinuum solid-phase heat transfer model for typical MEMS situations including an effective thermal conductivity that depends on device geometry and grain size, and incorporate this model into the FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (4) Perform combined gas-solid heat-transfer simulations using Calore with these models for the experimentally investigated devices, and compare simulation and experimental temperature profiles to assess model accuracy. These subtasks have been completed successfully, thereby completing the milestone task. Model and experimental temperature profiles are found to be in reasonable agreement for all cases examined. Modest systematic differences appear to be related to uncertainties in the geometric dimensions of the test structures and in the thermal conductivity of the polycrystalline silicon test structures, as well as uncontrolled nonuniform changes in this quantity over time and during operation.
- Research Organization:
- Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 942182
- Report Number(s):
- SAND2008-5749; TRN: US200902%%158
- Country of Publication:
- United States
- Language:
- English
Similar Records
Measured and predicted temperature profiles along MEMS bridges at pressures from 0.05 to 625 torr.
Integrated Biomass Gasification with Catalytic Partial Oxidation for Selective Tar Conversion
Related Subjects
ACTUATORS
ELECTRIC CONDUCTIVITY
HEAT TRANSFER
THERMAL CONDUCTIVITY
VALIDATION
MATHEMATICAL MODELS
MICROELECTRONICS
TEMPERATURE DISTRIBUTION
Microelectromechanical systems-Thermal properties.
Actuators-Materials.
Microelectromechanical systems-Mathematical models.
Materials-Thermal properties.