Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.

doi:10.2172/942056

Title: Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.

Full Record
Other Related Research

Abstract

Solar energy conversion is increasingly being recognized as one of the principal ways to meet future energy needs without causing detrimental environmental impact. Hybrid organic-inorganic solar cells (SCs) are attracting particular interest due to the potential for low cost manufacturing and for use in new applications, such as consumer electronics, architectural integration and light-weight sensors. Key materials advantages of these next generation SCs over conventional semiconductor SCs are in design opportunities--since the different functions of the SCs are carried out by different materials, there are greater materials choices for producing optimized structures. In this project, we explore the hybrid organic-inorganic solar cell system that consists of oxide, primarily ZnO, nanostructures as the electron transporter and poly-(3-hexylthiophene) (P3HT) as the light-absorber and hole transporter. It builds on our capabilities in the solution synthesis of nanostructured semiconducting oxide arrays to this photovoltaic (PV) technology. The three challenges in this hybrid material system for solar applications are (1) achieving inorganic nanostructures with critical spacing that matches the exciton diffusion in the polymer, {approx} 10 nm, (2) infiltrating the polymer completely into the dense nanostructure arrays, and (3) optimizing the interfacial properties to facilitate efficient charge transfer. We have gained an understanding and controlmore »« less

Authors:: Hsu, Julia, W. P.

Publication Date:: Mon Sep 01 00:00:00 EDT 2008

Research Org.:: Sandia National Laboratories (SNL), Albuquerque, NM, and Livermore, CA (United States)

Sponsoring Org.:: USDOE

OSTI Identifier:: 942056

Report Number(s):: SAND2008-5999
TRN: US200902%%82

DOE Contract Number:: AC04-94AL85000

Resource Type:: Technical Report

Country of Publication:: United States

Language:: English

Subject:: 14 SOLAR ENERGY; COATINGS; DEPOSITION; DIFFUSION; ELECTRONS; ENVIRONMENTAL IMPACTS; EXCITONS; FABRICATION; MANUFACTURING; NANOSTRUCTURES; OXIDES; POLYMERS; QUANTUM EFFICIENCY; SOLAR CELLS; SOLAR ENERGY CONVERSION; SUBSTRATES; SYNTHESIS; Semiconductors.; Solar energy-Research.; Nanostructure materials.; Solar cells.

Citation Formats


                    Hsu, Julia, W. P. Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells..  United States: N. p., 2008. 
        Web.  doi:10.2172/942056.

Copy to clipboard


                    Hsu, Julia, W. P. Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells..  United States.  https://doi.org/10.2172/942056

Copy to clipboard


                    Hsu, Julia, W. P. 2008.  
        "Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.".  United States.  https://doi.org/10.2172/942056.  https://www.osti.gov/servlets/purl/942056.

Copy to clipboard


                    
@article{osti_942056,

  title        = {Development of nanostructured and surface modified semiconductors for hybrid organic-inorganic solar cells.},

  author       = {Hsu, Julia, W. P.},

  abstractNote = {Solar energy conversion is increasingly being recognized as one of the principal ways to meet future energy needs without causing detrimental environmental impact. Hybrid organic-inorganic solar cells (SCs) are attracting particular interest due to the potential for low cost manufacturing and for use in new applications, such as consumer electronics, architectural integration and light-weight sensors. Key materials advantages of these next generation SCs over conventional semiconductor SCs are in design opportunities--since the different functions of the SCs are carried out by different materials, there are greater materials choices for producing optimized structures. In this project, we explore the hybrid organic-inorganic solar cell system that consists of oxide, primarily ZnO, nanostructures as the electron transporter and poly-(3-hexylthiophene) (P3HT) as the light-absorber and hole transporter. It builds on our capabilities in the solution synthesis of nanostructured semiconducting oxide arrays to this photovoltaic (PV) technology. The three challenges in this hybrid material system for solar applications are (1) achieving inorganic nanostructures with critical spacing that matches the exciton diffusion in the polymer, {approx} 10 nm, (2) infiltrating the polymer completely into the dense nanostructure arrays, and (3) optimizing the interfacial properties to facilitate efficient charge transfer. We have gained an understanding and control over growing oriented ZnO nanorods with sub-50 nm diameters and the required rod-to-rod spacing on various substrates. We have developed novel approaches to infiltrate commercially available P3HT in the narrow spacing between ZnO nanorods. Also, we have begun to explore ways to modify the interfacial properties. In addition, we have established device fabrication and testing capabilities at Sandia for prototype devices. Moreover, the control synthesis of ZnO nanorod arrays lead to the development of an efficient anti-reflection coating for multicrystalline Si solar cells. An important component of this project is the collaboration with Dr. Dave Ginley's group at NREL. The NREL efforts, which are funded by NREL's LDRD program, focus on measuring device performance, external quantum efficiency, photoconductance through highly specialized non-contact time-resolved microwave conductivity (TRMC) measurements, and vapor phase deposition of oxide materials. The close collaboration with NREL enables us to enter this competitive field in such short time. Joint publications and presentations have resulted from this fruitful collaboration. To this date, 5 referred journal papers have resulted from this project, with 2 more in preparation. Several invited talks and numerous contributed presentations in international conferences are also noted. Sandia has gained the reputation of being one of forefront research groups on nanostructured hybrid solar cells.},

  doi          = {10.2172/942056},

  url          = {https://www.osti.gov/biblio/942056},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Mon Sep 01 00:00:00 EDT 2008},

  month        = {Mon Sep 01 00:00:00 EDT 2008}

}

Copy to clipboard

Technical Report:

View Technical Report (2.48 MB)

https://doi.org/10.2172/942056

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Effect of Polymer Processing on the Performance of Poly(3-hexylthiophene)/ZnO Nanorod Photovoltaic Devices

Journal Article Olson, Dana; Lee, Yun-Ju; White, Matthew; ... - Journal of Physical Chemistry. C

Effective infiltration of the polymer into the nanostructured oxide is critical for optimizing the performance of hybrid π-conjugated polymer/nanostructured metal oxide semiconductor photovoltaic devices. We investigated the effect of polymer processing parameters, solvent selection, and thermal annealing on poly(3-hexylthiophene) (P3HT)/ZnO nanorod photovoltaic devices and found that these play an important role in the degree of polymer infiltration and the subsequent device performance. We demonstrate that using dichlorobenzene as a solvent produced better performance devices than using chloroform. In addition, the infiltration of P3HT into the ZnO nanorod array has been improved through annealing and subsequent slow cooling. Time-resolved microwave conductivitymore »« less
https://doi.org/10.1021/jp0757816
Alkyl Surface Treatments of Planar Zinc Oxide in Hybrid Organic/Inorganic Solar Cells

Journal Article Allen, C; Baker, D; Brenner, T; ... - Journal of Physical Chemistry. C

Hybrid organic/inorganic solar cells have not lived up to their potential because of poor interface properties. Interfacial molecular layers provide a way of adjusting these devices to improve their performance. We have studied a prototypical system involving poly(3-hexylthiophene) (P3HT) on planar zinc oxide (ZnO) films that have been modified with two types of molecules having identical 18-carbon alkyl chain termination and different surface attachments: octadecanethiol (ODT) and octadecyltriethoxysilane (OTES). We examined the functionalized surfaces using water contact angle measurements, Kelvin probe measurements, infrared absorbance spectroscopy, and atomic force microscopy. These have shown that OTES forms disordered incomplete monolayers, while ODTmore »« less
https://doi.org/10.1021/jp211692m
Center for Energy Efficient Materials (CEEM) (Final Technical Report)

Technical Report Bowers, John

The mission of the Center for Energy Efficient Materials (CEEM) was to serve the Department of Energy and the nation as a center of excellence dedicated to advancing basic research in nano-structured materials and devices for applications to solar electricity, thermoelectric conversion of waste heat to electricity, and solidstate lighting. The foundation of CEEM was based on the unique capabilities of UCSB and its partner institutions to control, synthesize, characterize, model, and apply materials at the nanoscale for more efficient sustainable energy resources. This unique expertise was a key source of the synergy that unified the research of the Center.more »« less
https://doi.org/10.2172/1169473

Full Text Available
Molecular and Nanoscale Engineering of High Efficiency Excitonic Solar Cells

Technical Report Jenekhe, Samson; Ginger, David; Cao, Guozhong

We combined the synthesis of new polymers and organic-inorganic hybrid materials with new experimental characterization tools to investigate bulk heterojunction (BHJ) polymer solar cells and hybrid organic-inorganic solar cells during the 2007-2010 period (phase I) of this project. We showed that the bulk morphology of polymer/fullerene blend solar cells could be controlled by using either self-assembled polymer semiconductor nanowires or diblock poly(3-alkylthiophenes) as the light-absorbing and hole transport component. We developed new characterization tools in-house, including photoinduced absorption (PIA) spectroscopy, time-resolved electrostatic force microscopy (TR-EFM) and conductive and photoconductive atomic force microscopy (c-AFM and pc-AFM), and used them to investigatemore »« less
https://doi.org/10.2172/1235444

Full Text Available
Enhanced performance of P3HT/(PCBM:ZnO:TiO{sub 2}) blend based hybrid organic solar cells

Journal Article Murray, R.; Imran, M.; Ali, S.; ... - Materials Research Bulletin

Highlights: • We fabricated hybrid bulk heterojunction organic solar cells. • TiO{sub 2} and ZnO nanoparticles replace PCBM with fixed amount of P3HT in active layer • PCE was significantly improved by the introduction of TiO{sub 2} and ZnO. • A possible route toward low-cost OPV. • To the best of my knowledge, this work is the first time going to report. - Abstract: Quaternary blend hybrid organic solar cells enjoy both an increased light absorption range and an easy method to fabricate because of the simple structure. In this study effects of mixing inorganic metal oxides (ZnO and TiO{submore »« less
https://doi.org/10.1016/J.MATERRESBULL.2015.11.031

Similar Records