A 30 MW, 200 MHz Inductive Output Tube for RF Accelerators
This program investigated development of a multiple beam inductive output tube (IOT) to produce 30 MW pulses at 200 MHz. The program was successful in demonstrating feasibility of developing the source to achieve the desired power in microsecond pulses with 70% efficiency. The predicted gain of the device is 24 dB. Consequently, a 200 kW driver would be required for the RF input. Estimated cost of this driver is approximately $1.25 M. Given the estimated development cost of the IOT of approximately $750K and the requirements for a test set that would significantly increase the cost, it was determined that development could not be achieved within the funding constraints of a Phase II program.
- Research Organization:
- Calabazas Creek Research, Inc.
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- FG02-07ER84912
- OSTI ID:
- 934376
- Report Number(s):
- Final Report
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of a 402.5 MHz 140 kW Inductive Output Tube
A 350 MHz, 200 kW CW, Multiple Beam Inductive Output Tube - Final Report
A 200 MHz 35 MW Multiple Beam Klystron for Accelerator Applications Final Report
Technical Report
·
Wed May 09 00:00:00 EDT 2012
·
OSTI ID:934376
A 350 MHz, 200 kW CW, Multiple Beam Inductive Output Tube - Final Report
Technical Report
·
Wed Nov 28 00:00:00 EST 2012
·
OSTI ID:934376
+2 more
A 200 MHz 35 MW Multiple Beam Klystron for Accelerator Applications Final Report
Technical Report
·
Mon Nov 28 00:00:00 EST 2011
·
OSTI ID:934376
+1 more