Measuring the Repassivation Potential of Alloy 22 Using the Potentiodynamic - Galvanostatic - Potentiostatic Method
Traditionally, the susceptibility of Alloy 22 (N06022) to suffer crevice corrosion has been measured using the Cyclic Potentiodynamic Polarization (CPP) technique (ASTM G 61). When the alloy is not very susceptible to crevice corrosion, the values of repassivation potential obtained using the CPP technique are not highly reproducible. To circumvent the large uncertainty in the values of the repassivation potential by the CPP method, the repassivation potential of Alloy 22 may be measured using a slower method that combines sequentially potentiodynamic, galvanostatic and potentiostatic treatments (this method is called the Tsujikawa-Hisamatsu Electrochemical or THE method). In the THE method the anodic charge is applied to the specimen in a more controlled manner, which avoids driving the alloy to transpassivity and therefore results in more reproducible repassivation potential values. Results using THE method under various testing conditions are presented. A new standard has been prepared for ASTM balloting for the THE method. The round robin matrix results are also discussed.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 920492
- Report Number(s):
- UCRL-CONF-230669; TRN: US200818%%674
- Resource Relation:
- Conference: Presented at: Symposim on Advances in Electrochemical Techniques for Corrosion Monitoring and Measurement, Norfolk, VA, United States, May 22 - May 23, 2007
- Country of Publication:
- United States
- Language:
- English
Similar Records
Determination of the Crevice Repassivation Potential of Alloy 22 by a Potentiodynamic-Galvanostatic-Potentiostatic Method
Comparison of Electrochemical Methods to Determine Crevice Corrosion Repassivation Potential of Alloy 22 in Chloride Solutions