D&D Technologies for Pollution Prevention
A new Accelerated Site Technology Deployment (ASTD) project was awarded in FY 2002 to the Idaho National Engineering and Environmental Laboratory (INEEL) to deploy technologies that decrease pollution and waste in the areas of facility characterization, sludge treatment, dust and contamination control, and concrete demolition. This project was called "D&D Technologies for Pollution Prevention" and planned to deploy four different technologies. To reduce protective equipment requirements, waste generation, and risk of radiation exposure during facility characterization, the Russian Gamma Locater Device (GLD) and Isotopic Identification Device (IID) for remote characterization was investigated. The GLD detects gamma ray readings and video images remotely and uses radio communication to transmit the readings to personnel located a safe distance from the contaminated area. The IID, an integral part of the GLD, provides real-time spectrometric analysis of radiation sources for remotely identifying the specific radioactive isotopes present in the facility. At the INEEL, sludge has accumulated in the bottom of a fuel storage pool and the presence of heavy metals in the sludge makes it a mixed waste. This project planned to use LEADX® to treat sludge in place to effectively make all heavy metals in the sludge insoluble. LEADX® is a dry granular chemical additive (apatite) used for in-situ treatment of heavy-metal-contaminated material. LEADX® chemically bonds to any free heavy metals that it contacts and forms a stable, non-leachable molecule. After treating the sludge with LEADX®, it was to be left in the basin and the pool filled with grout. The successful treatment of the sludge with LEADX® will reduce the amount of waste to be disposed at the burial ground by eliminating the need to remove the sludge from the basin. Many off-gas and duct systems being dismantled contain dust and lint that has been contaminated. Encapsulation Technologies, LLC has developed a patented process for eliminating airborne radioactivity and fixing contamination in place remotely without the need for people or equipment to enter the area being treated. The process uses a device called the Passive Aerosol Generator (PAG) to create an aerosol of a capture coating. The aerosol condenses on surfaces, capturing the contaminants in place. Use of this fogging technology will reduce or eliminate the requirement for glovebags and extensive contamination control during cutting and removal of ductwork. Demolition of building slabs and foundations is necessary at most DOE facilities undergoing D&D. The baseline method for their demolition at the INEEL is to use a hydraulic hammer on the end of a backhoe or trackhoe. However, the vibration of the hammer typically causes
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- DE-AC07-99ID-13727
- OSTI ID:
- 910772
- Report Number(s):
- INEEL/CON-02-01000; TRN: US200802%%149
- Resource Relation:
- Conference: Waste Management 2003,Tucson, AZ,02/23/2003,02/27/2003
- Country of Publication:
- United States
- Language:
- English
Similar Records
Mobile robot worksystem (Rosie). Innovative technology summary report
Cost Savings through Innovation in Decontamination, Decommissioning, and Dismantlement