Radial and tangential winding coil probes for sextupole magnet measurements
Rotating coil probes of radial and tangential winding geometries for the measurements of the magnetic center, main field integral and multipole coefficients of sextupole magnets are describes. Two sets of coils are sufficient for a probe of radial winding geometry. For a tangential winding probe, however, typically several sets of coils are required to measure the above magnetic parameters. The tangential coil geometry in this note is described with three sets of coils. The main sextupole field coefficients are defined as b{sub 2} = 1.0cm{sup {minus}2} and a{sub 2} = 0 for the expression of the multipole field coefficients.
- Research Organization:
- Argonne National Lab. (ANL), Argonne, IL (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- W-31-109-ENG-38
- OSTI ID:
- 89976
- Report Number(s):
- LS-173(ANL); ON: DE95015545; TRN: 95:017863
- Resource Relation:
- Other Information: PBD: [1995]
- Country of Publication:
- United States
- Language:
- English
Similar Records
Tagential winding coil probes for dipole, quadrupole and sextupole magnet measurements
A radial coil probe for quadrupole magnet measurements
Superconducting sextupole correction coil operating in persistent mode
Technical Report
·
Sat Jul 01 00:00:00 EDT 1995
·
OSTI ID:89976
A radial coil probe for quadrupole magnet measurements
Technical Report
·
Sat Jul 01 00:00:00 EDT 1995
·
OSTI ID:89976
Superconducting sextupole correction coil operating in persistent mode
Conference
·
Fri Mar 01 00:00:00 EST 1985
· IEEE Trans. Magn.; (United States)
·
OSTI ID:89976
+2 more