Passive Corrosion Behavior of Alloy 22
Alloy 22 (N06022) was designed to stand the most aggressive industrial applications, including both reducing and oxidizing acids. Even in the most aggressive environments, if the temperature is lower than 150 F (66 C) Alloy 22 would remain in the passive state having particularly low corrosion rates. In multi-ionic solutions that may simulate the behavior of concentrated ground water, even at near boiling temperatures, the corrosion rate of Alloy 22 is only a few nanometers per year because the alloy is in the complete passive state. The corrosion rate of passive Alloy 22 decreases as the time increases. Immersion corrosion testing also show that the newer generation of Ni-Cr-Mo alloys may offer a better corrosion resistance than Alloy 22 only in some highly aggressive conditions such as in hot acids.
- Research Organization:
- Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- W-7405-ENG-48
- OSTI ID:
- 894333
- Report Number(s):
- UCRL-CONF-218309; TRN: US0700141
- Resource Relation:
- Conference: Presented at: International High-Level Radioactive Waste Management Conference, Las Vegas, NV, United States, Apr 30 - May 04, 2006
- Country of Publication:
- United States
- Language:
- English
Similar Records
Localized Corrosion of Alloy 22 -Fabrication Effects-
Localized Corrosion of Alloy 22 -Fabrication Effects-FY05 Summary Report