SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC
Abstract
The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A); and Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine. This technical progress report covers work performed by Delphi from July through December 2002 under Department of Energy Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: Task 1--System Design and Integration; Task 2--Solid Oxide Fuel Cell Stack Developments; Task 3--Reformer Developments; Task 4--Development of Balance of Plant (BOP) Components; Task 5--Manufacturing Development (Privately Funded); Task 6--System Fabrication; and Task 7--System Testing.
- Authors:
- Publication Date:
- Research Org.:
- Delphi Automotive Systems (US)
- Sponsoring Org.:
- (US)
- OSTI Identifier:
- 821425
- DOE Contract Number:
- FC26-02NT41246
- Resource Type:
- Technical Report
- Resource Relation:
- Other Information: PBD: 9 Jun 2003
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 02 PETROLEUM; 03 NATURAL GAS; 24 POWER TRANSMISSION AND DISTRIBUTION; 30 DIRECT ENERGY CONVERSION; 33 ADVANCED PROPULSION SYSTEMS; ANODES; DESIGN; ENERGY CONVERSION; FABRICATION; FUEL CELLS; GASOLINE; INTERNAL COMBUSTION ENGINES; NATURAL GAS; OXIDATION; OXIDES; POWER GENERATION; POWER SYSTEMS; SOLID OXIDE FUEL CELLS; STEAM; TECHNOLOGY TRANSFER
Citation Formats
Shaffer, Steven, Kelly, Sean, Mukerjee, Subhasish, Schumann, David, and Mieney, H Skip. SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC. United States: N. p., 2003.
Web. doi:10.2172/821425.
Shaffer, Steven, Kelly, Sean, Mukerjee, Subhasish, Schumann, David, & Mieney, H Skip. SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC. United States. https://doi.org/10.2172/821425
Shaffer, Steven, Kelly, Sean, Mukerjee, Subhasish, Schumann, David, and Mieney, H Skip. 2003.
"SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC". United States. https://doi.org/10.2172/821425. https://www.osti.gov/servlets/purl/821425.
@article{osti_821425,
title = {SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC},
author = {Shaffer, Steven and Kelly, Sean and Mukerjee, Subhasish and Schumann, David and Mieney, H Skip},
abstractNote = {The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A); and Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine. This technical progress report covers work performed by Delphi from July through December 2002 under Department of Energy Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: Task 1--System Design and Integration; Task 2--Solid Oxide Fuel Cell Stack Developments; Task 3--Reformer Developments; Task 4--Development of Balance of Plant (BOP) Components; Task 5--Manufacturing Development (Privately Funded); Task 6--System Fabrication; and Task 7--System Testing.},
doi = {10.2172/821425},
url = {https://www.osti.gov/biblio/821425},
journal = {},
number = ,
volume = ,
place = {United States},
year = {Mon Jun 09 00:00:00 EDT 2003},
month = {Mon Jun 09 00:00:00 EDT 2003}
}