skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: The D0 solenoid NMR magnetometer

Abstract

A field monitoring system for the 2 Tesla Solenoid of the D0 detector is described. It is comprised of a very small NMR probe cabled to a DSP based signal processing board. The design magnetic field range is from 1.0 to 2.2 Tesla, corresponding to an RF frequency range of 42.57 to 93.67 MHz. The desired an accuracy is one part in 10{sup 5}. To minimize material in the interaction region of the D0 detector, the overall thickness of the NMR probe is 4 mm, including its mounting plate, and its width is 10 mm. To minimize cable mass, 4mm diameter IMR-100A cables are used for transmitting the RF signals from a nearby patch panel 25 meters to each of four probes mounted within the bore of the solenoid. RG213U cables 45 meters long are used to send the RF from the movable counting house to the patch panel. With this setup, the detector signal voltage at the moving counting room is in the range of 250-400 mV.

Authors:
Publication Date:
Research Org.:
Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
Sponsoring Org.:
USDOE Office of Energy Research (ER) (US)
OSTI Identifier:
804887
Report Number(s):
FERMILAB-Conf-02/290-E
TRN: US0205598
DOE Contract Number:  
AC02-76CH03000
Resource Type:
Conference
Resource Relation:
Conference: Nuclear Science Symposium, Norfolk, VA (US), 11/09/2002--11/16/2002; Other Information: PBD: 20 Nov 2002
Country of Publication:
United States
Language:
English
Subject:
43 PARTICLE ACCELERATORS; ACCURACY; CABLES; DESIGN; FREQUENCY RANGE; MAGNETIC FIELDS; MAGNETOMETERS; MONITORING; PROBES; SOLENOIDS; THICKNESS

Citation Formats

Sten Uldall Hansen Terry Kiper, Tom Regan, John Lofgren et al. The D0 solenoid NMR magnetometer. United States: N. p., 2002. Web.
Sten Uldall Hansen Terry Kiper, Tom Regan, John Lofgren et al. The D0 solenoid NMR magnetometer. United States.
Sten Uldall Hansen Terry Kiper, Tom Regan, John Lofgren et al. 2002. "The D0 solenoid NMR magnetometer". United States. https://www.osti.gov/servlets/purl/804887.
@article{osti_804887,
title = {The D0 solenoid NMR magnetometer},
author = {Sten Uldall Hansen Terry Kiper, Tom Regan, John Lofgren et al.},
abstractNote = {A field monitoring system for the 2 Tesla Solenoid of the D0 detector is described. It is comprised of a very small NMR probe cabled to a DSP based signal processing board. The design magnetic field range is from 1.0 to 2.2 Tesla, corresponding to an RF frequency range of 42.57 to 93.67 MHz. The desired an accuracy is one part in 10{sup 5}. To minimize material in the interaction region of the D0 detector, the overall thickness of the NMR probe is 4 mm, including its mounting plate, and its width is 10 mm. To minimize cable mass, 4mm diameter IMR-100A cables are used for transmitting the RF signals from a nearby patch panel 25 meters to each of four probes mounted within the bore of the solenoid. RG213U cables 45 meters long are used to send the RF from the movable counting house to the patch panel. With this setup, the detector signal voltage at the moving counting room is in the range of 250-400 mV.},
doi = {},
url = {https://www.osti.gov/biblio/804887}, journal = {},
number = ,
volume = ,
place = {United States},
year = {Wed Nov 20 00:00:00 EST 2002},
month = {Wed Nov 20 00:00:00 EST 2002}
}

Conference:
Other availability
Please see Document Availability for additional information on obtaining the full-text document. Library patrons may search WorldCat to identify libraries that hold this conference proceeding.

Save / Share: