Development and test of single-bore $$Cos \vartheta$$ Nb$$_3$$Sn dipole models with cold iron yoke
Conference
·
· IEEE Trans.Appl.Supercond.
- Fermilab
Two short Nb$$_3$$Sn dipole models based on a single-bore cos-theta coil with a cold iron yoke were fabricated and tested at Fermilab. This paper summarizes the details of magnet design and fabrication procedure, and reports the test results including quench performance and quench heater studies, and the magnetic measurements.
- Research Organization:
- Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), High Energy Physics (HEP)
- DOE Contract Number:
- AC02-07CH11359
- OSTI ID:
- 790166
- Report Number(s):
- FERMILAB-CONF-01-380; oai:inspirehep.net:582025; TRN: US0200358
- Journal Information:
- IEEE Trans.Appl.Supercond., Vol. 12, Issue 1; Other Information: PBD: 14 Jan 2002
- Country of Publication:
- United States
- Language:
- English
Similar Records
Field quality of the Fermilab Nb{sub 3}Sn high field dipole model
Development and First Test of the 15 T Nb$_3$Sn Dipole Demonstrator MDPCT1
Field quality of the Fermilab NB3SN cos-theta dipole models
Conference
·
Thu Jul 12 00:00:00 EDT 2001
·
OSTI ID:790166
Development and First Test of the 15 T Nb$_3$Sn Dipole Demonstrator MDPCT1
Conference
·
Mon Feb 10 00:00:00 EST 2020
· IEEE Trans.Appl.Supercond.
·
OSTI ID:790166
+10 more
Field quality of the Fermilab NB3SN cos-theta dipole models
Conference
·
Fri Jun 28 00:00:00 EDT 2002
·
OSTI ID:790166