Development of a direct-injected natural gas engine system for heavy-duty vehicles: Final report phase 2
This report summarizes the results of Phase 2 of this contract. The authors completed four tasks under this phase of the subcontract. (1) They developed a computational fluid dynamics (CFD) model of a 3500 direct injected natural gas (DING) engine gas injection/combustion system and used it to identify DING ignition/combustion system improvements. The results were a 20% improvement in efficiency compared to Phase 1 testing. (2) The authors designed and procured the components for a 3126 DING engine (300 hp) and finished assembling it. During preliminary testing, the engine ran successfully at low loads for approximately 2 hours before injector tip and check failures terminated the test. The problems are solvable; however, this phase of the program was terminated. (3) They developed a Decision & Risk Analysis model to compare DING engine technology with various other engine technologies in a number of commercial applications. The model shows the most likely commercial applications for DING technology and can also be used to identify the sensitivity of variables that impact commercial viability. (4) MVE, Inc., completed a preliminary design concept study that examines the major design issues involved in making a reliable and durable 3,000 psi LNG pump. A primary concern is the life of pump seals and piston rings. Plans for the next phase of this program (Phase 3) have been put on indefinite hold. Caterpillar has decided not to fund further DING work at this time due to limited current market potential for the DING engine. However, based on results from this program, the authors believe that DI natural gas technology is viable for allowing a natural gas-fueled engine to achieve diesel power density and thermal efficiency for both the near and long terms.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC36-99GO10337
- OSTI ID:
- 753776
- Report Number(s):
- NREL/SR-540-27501; TRN: AH200011%%52
- Resource Relation:
- Other Information: PBD: 2 Mar 2000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Development of a direct-injected natural gas engine system for heavy-duty vehicles: Final report phase 1
Advanced Natural Gas Reciprocating Engine(s)
Related Subjects
03 NATURAL GAS
02 PETROLEUM
54 ENVIRONMENTAL SCIENCES
FUEL SUBSTITUTION
NATURAL GAS
DIESEL FUELS
FUEL INJECTION SYSTEMS
ENERGY DENSITY
NITROGEN OXIDES
AIR POLLUTION CONTROL
DIRECT INJECTED NATURAL GAS ENGINE
HEAVY-DUTY VEHICLES
COMPUTATIONAL FLUID DYNAMICS
CFD
DING
IGNITION/COMBUSTION SYSTEM
LNG PUMP