Estimates of error introduced when one-dimensional inverse heat transfer techniques are applied to multi-dimensional problems
A study of the errors introduced when one-dimensional inverse heat conduction techniques are applied to problems involving two-dimensional heat transfer effects was performed. The geometry used for the study was a cylinder with similar dimensions as a typical container used for the transportation of radioactive materials. The finite element analysis code MSC P/Thermal was used to generate synthetic test data that was then used as input for an inverse heat conduction code. Four different problems were considered including one with uniform flux around the outer surface of the cylinder and three with non-uniform flux applied over 360{degree}, 180{degree}, and 90{degree} sections of the outer surface of the cylinder. The Sandia One-Dimensional Direct and Inverse Thermal (SODDIT) code was used to estimate the surface heat flux of all four cases. The error analysis was performed by comparing the results from SODDIT and the heat flux calculated based on the temperature results obtained from P/Thermal. Results showed an increase in error of the surface heat flux estimates as the applied heat became more localized. For the uniform case, SODDIT provided heat flux estimates with a maximum error of 0.5% whereas for the non-uniform cases, the maximum errors were found to be about 3%, 7%, and 18% for the 360{degree}, 180{degree}, and 90{degree} cases, respectively.
- Research Organization:
- Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sandia National Lab. (SNL-CA), Livermore, CA (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC04-94AL85000
- OSTI ID:
- 750237
- Report Number(s):
- SAND2000-0067C; TRN: US0001575
- Resource Relation:
- Conference: 2000 National Heat Transfer Conference, Pittsburgh, PA (US), 08/20/2000--08/22/2000; Other Information: PBD: 6 Jan 2000
- Country of Publication:
- United States
- Language:
- English
Similar Records
Uncertainty analysis of heat flux measurements estimated using a one-dimensional, inverse heat-conduction program.
ORMDIN: a finite element program for two-dimensional nonlinear inverse heat conduction analysis