A laser/EMAT (electromagnetic-acoustic transducer) concurrent weld inspection system
A noncontacting ultrasonic sensor system is being developed for on-line inspection of thick section welds made by a robotic gas metal arc welding (GMAW) system. The sensor system consists of a pulsed laser for generating the ultrasound and an electromagnetic-acoustic transducer (EMAT) for receiving it. The sensor will follow closely behind the weld head and inspect the solidified weld bead for flaws. The main advantage of this technique is that flaws can be found and repaired before they are covered by subsequent welding passes. This is expected to be much simpler and less likely to induce further flaws than current practice since a large amount of otherwise good weld metal need not be removed to reach and repair a flaw. The system also monitors the welding process, i.e., detection of a large number of flaws indicates that the process is no longer operating as planned. In this paper, the technique for detecting incomplete sidewall penetration is demonstrated and methods for improving the system are discussed. 12 refs., 3 figs., 1 tab.
- Research Organization:
- EG and G Idaho, Inc., Idaho Falls, ID (USA)
- Sponsoring Organization:
- DOE/ER
- DOE Contract Number:
- AC07-76ID01570
- OSTI ID:
- 6377323
- Report Number(s):
- EGG-M-90197; CONF-900791-6; ON: DE91001915
- Resource Relation:
- Conference: Review of progress in quantitative NDE, La Jolla, CA (USA), 15-20 Jul 1990
- Country of Publication:
- United States
- Language:
- English
Similar Records
Sensing the gas metal arc welding process
Sensing the gas metal arc welding process