Cathode-follower power amplifier

Conference · Sat Jan 01 00:00:00 EST 1983

OSTI ID:6333266

Giordano, S; Puglisi, M

In circular accelerators and particularly in storage rings it is essential that the total impedance, as seen by the beam, be kept below some critical value. A model of the accelerating system was built using a single-ended cathode-follower amplifier driving a ferrite-loaded cavity. The system operated at 234.5 kHz with a peak output voltage of +-10 kV on the gap. The dynamic output impedance, as measured on the gap, was < 15 ohms.

• Research Organization: Brookhaven National Lab., Upton, NY (USA)
• DOE Contract Number: AC02-76CH00016
• OSTI ID: 6333266
• Report Number(s): BNL-32756; CONF-830311-30; ON: DE83010061
• Resource Relation: Conference: Particle accelerator conference, Santa Fe, NM, USA, 21 Mar 1983
• Country of Publication: United States
• Language: English

Related Subjects

43 PARTICLE ACCELERATORS
CYCLIC ACCELERATORS
RF SYSTEMS
AMPLIFIERS
BEAM CURRENTS
CAVITY RESONATORS
CIRCULAR CONFIGURATION
ELECTRIC IMPEDANCE
ACCELERATORS
CONFIGURATION
CURRENTS
ELECTRONIC EQUIPMENT
EQUIPMENT
IMPEDANCE
RESONATORS
430200* - Particle Accelerators- Beam Dynamics
Field Calculations
&amp; Ion Optics