Thin-film electrolytes for reduced temperature solid oxide fuel cells
Solid oxide fuel cells produce electricity at very high efficiency and have very low to negligible emissions, making them an attractive option for power generation for electric utilities. However, conventional SOFC`s are operated at 1000{degrees}C or more in order to attain reasonable power density. The high operating temperature of SOFC`s leads to complex materials problems which have been difficult to solve in a cost-effective manner. Accordingly, there is much interest in reducing the operating temperature of SOFC`s while still maintaining the power densities achieved at high temperatures. There are several approaches to reduced temperature operation including alternative solid electrolytes having higher ionic conductivity than yttria stabilized zirconia, thin solid electrolyte membranes, and improved electrode materials. Given the proven reliability of zirconia-based electrolytes (YSZ) in long-term SOFC tests, the use of stabilized zirconia electrolytes in reduced temperature fuel cells is a logical choice. In order to avoid compromising power density at intermediate temperatures, the thickness of the YSZ electrolyte must be reduced from that in conventional cells (100 to 200 {mu}m) to approximately 4 to 10 {mu}m. There are a number of approaches for depositing thin ceramic films onto porous supports including chemical vapor deposition/electrochemical vapor deposition, sol-gel deposition, sputter deposition, etc. In this paper we describe an inexpensive approach involving the use of colloidal dispersions of polycrystalline electrolyte for depositing 4 to 10 {mu}m electrolyte films onto porous electrode supports in a single deposition step. This technique leads to highly dense, conductive, electrolyte films which exhibit near theoretical open circuit voltages in H{sub 2}/air fuel cells. These electrolyte films exhibit bulk ionic conductivity, and may see application in reduced temperature SOFC`s, gas separation membranes, and fast response sensors.
- Research Organization:
- Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- Electric Power Research Inst., Palo Alto, CA (United States); Gas Research Inst., Chicago, IL (United States)
- DOE Contract Number:
- AC03-76SF00098
- OSTI ID:
- 61712
- Report Number(s):
- LBL-36813; CONF-941144-146; ON: DE95011273; TRN: 95:004283
- Resource Relation:
- Conference: Fall meeting of the Materials Research Society (MRS), Boston, MA (United States), 28 Nov - 9 Dec 1994; Other Information: PBD: Nov 1994
- Country of Publication:
- United States
- Language:
- English
Similar Records
Scalable Nano-Scaffold SOFC Anode Architecture Enabling Direct Hydrocarbon Utilization
Medium-temperature solid oxide fuel cells prepared using reactive magnetron sputtering. Ph.D. Thesis
Related Subjects
36 MATERIALS SCIENCE
SOLID ELECTROLYTE FUEL CELLS
PERFORMANCE TESTING
YTTRIUM OXIDES
DEPOSITION
ZIRCONIUM OXIDES
THIN FILMS
CERAMICS
MICROSTRUCTURE
IONIC CONDUCTIVITY
TEMPERATURE DEPENDENCE
ELECTRODES
NICKEL OXIDES
LANTHANUM OXIDES
STRONTIUM OXIDES
MANGANESE OXIDES
SINTERING