Progress on the development of APS beam position monitoring system
This paper describes the development status of the beam position monitoring system for the Advanced Photon Source (APS), a third-generation light source now under construction at Argonne National Laboratory. The accelerator complex will consist of an electron linac, a positron linac, a positron accumulator ring (PAR), an injector synchrotron and a storage ring. For beam position measurement, striplines will be used on the linacs, while button-type pickups will be used on the injector synchrotron and the storage ring. A test stand with a prototype injector synchrotron beam position monitor (BPM) unit has been built, and we present the results of position calibration measurements using a wire. Comparison of the results with theoretical calculations will be presented. The current effort on similar storage ring BPM system measurements will also be discussed. 4 refs., 5 figs., 2 tabs.
- Research Organization:
- Argonne National Lab., IL (USA)
- Sponsoring Organization:
- USDOE; USDOE, Washington, DC (USA)
- DOE Contract Number:
- W-31109-ENG-38
- OSTI ID:
- 5935627
- Report Number(s):
- ANL/CP-73092; CONF-910505-30; ON: DE91011856
- Resource Relation:
- Conference: 1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC), San Francisco, CA (USA), 6-9 May 1991
- Country of Publication:
- United States
- Language:
- English
Similar Records
Beam position monitor calibration for the Advanced Photon Source
The APS linac beam position monitors and electronics