Practical experience applied to the design of injection and sample manifolds to perform in-place surveillance tests according to ANSI/ASME N-510
- NUCON International, Inc., Columbus, OH (United States)
At the current level of maturity and experience in the nuclear industry, regarding testing of air treatment systems, it is now possible to design and qualify injection and sample manifolds for most applications. While the qualification of sample manifolds is still in its infancy, injection manifolds have reached a mature stage that helps to eliminate the {open_quotes}hit or miss{close_quotes} type of design. During the design phase, manifolds can be adjusted to compensate for poor airflow distribution, laminar flow conditions, and to take advantage of any system attributes. Experience has shown that knowing the system attributes before the design phase begins is an essential element to a successful manifold design. The use of a spreadsheet type program commonly found on most personal computers can afford a greater flexibility and a reduction in time spent in the design phase. The experience gained from several generations of manifold design has culminated in a set of general design guidelines. Use of these guidelines, along with a good understanding of the type of testing (theoretical and practical), can result in a good manifold design requiring little or no field modification. The requirements for manifolds came about because of the use of multiple banks of components and unconventional housing inlet configurations. Multiple banks of adsorbers and pre and post HEPA`s required that each bank be tested to insure that each one does not exceed a specific allowable leakage criterion. 5 refs., 5 figs., 1 tab.
- Research Organization:
- Harvard Univ., Boston, MA (United States). Harvard Air Cleaning Lab.; USDOE Assistant Secretary for Environment, Safety, and Health, Washington, DC (United States). Office of Environmental Guidance; US Nuclear Regulatory Commission (NRC), Washington, DC (United States). Office of Nuclear Regulatory Research; International Society of Nuclear Air Treatment Technologies, Inc., Batavia, OH (United States)
- OSTI ID:
- 567176
- Report Number(s):
- NUREG/CP-0153; CONF-960715-; ON: TI97008959; TRN: 98:003279
- Resource Relation:
- Conference: 24. nuclear air cleaning and treatment conference, Portland, OR (United States), 15-18 Jul 1996; Other Information: PBD: Aug 1997; Related Information: Is Part Of Proceedings of the 24. DOE/NRC nuclear air cleaning and treatment conference; First, M.W. [ed.] [Harvard Univ., Boston, MA (United States). Harvard Air Cleaning Lab.]; PB: 1022 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
ASME AG-1 Section FC Qualified HEPA Filters; a Particle Loading Comparison - 13435
EXPERIMENTAL INVESTIGATION OF HEAT REJECTION PROBLEMS IN NUCLEAR SPACE POWERPLANTS. VOLUME 1. EXPERIMENTAL EVALUATION OF HYDRODYNAMIC LOSSES IN MANIFOLDS. Period Covered: June 1, 1962 throughMay 31, 1963